Peripheral Control functions. More...

Collaboration diagram for TIM Peripheral Control functions:

Functions
HAL_StatusTypeDef	HAL_TIM_OC_ConfigChannel (TIM_HandleTypeDef htim, const TIM_OC_InitTypeDef sConfig, uint32_t Channel)
	Initializes the TIM Output Compare Channels according to the specified parameters in the TIM_OC_InitTypeDef.

HAL_StatusTypeDef	HAL_TIM_PWM_ConfigChannel (TIM_HandleTypeDef htim, const TIM_OC_InitTypeDef sConfig, uint32_t Channel)
	Initializes the TIM PWM channels according to the specified parameters in the TIM_OC_InitTypeDef.

HAL_StatusTypeDef	HAL_TIM_IC_ConfigChannel (TIM_HandleTypeDef htim, const TIM_IC_InitTypeDef sConfig, uint32_t Channel)
	Initializes the TIM Input Capture Channels according to the specified parameters in the TIM_IC_InitTypeDef.

HAL_StatusTypeDef	HAL_TIM_OnePulse_ConfigChannel (TIM_HandleTypeDef htim, TIM_OnePulse_InitTypeDef sConfig, uint32_t OutputChannel, uint32_t InputChannel)
	Initializes the TIM One Pulse Channels according to the specified parameters in the TIM_OnePulse_InitTypeDef.

HAL_StatusTypeDef	HAL_TIM_ConfigOCrefClear (TIM_HandleTypeDef htim, const TIM_ClearInputConfigTypeDef sClearInputConfig, uint32_t Channel)
	Configures the OCRef clear feature.

HAL_StatusTypeDef	HAL_TIM_ConfigClockSource (TIM_HandleTypeDef htim, const TIM_ClockConfigTypeDef sClockSourceConfig)
	Configures the clock source to be used.

HAL_StatusTypeDef	HAL_TIM_ConfigTI1Input (TIM_HandleTypeDef *htim, uint32_t TI1_Selection)
	Selects the signal connected to the TI1 input: direct from CH1_input or a XOR combination between CH1_input, CH2_input & CH3_input.

HAL_StatusTypeDef	HAL_TIM_SlaveConfigSynchro (TIM_HandleTypeDef htim, const TIM_SlaveConfigTypeDef sSlaveConfig)
	Configures the TIM in Slave mode.

HAL_StatusTypeDef	HAL_TIM_SlaveConfigSynchro_IT (TIM_HandleTypeDef htim, const TIM_SlaveConfigTypeDef sSlaveConfig)
	Configures the TIM in Slave mode in interrupt mode.

HAL_StatusTypeDef	HAL_TIM_DMABurst_WriteStart (TIM_HandleTypeDef htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, const uint32_t BurstBuffer, uint32_t BurstLength)
	Configure the DMA Burst to transfer Data from the memory to the TIM peripheral.

HAL_StatusTypeDef	HAL_TIM_DMABurst_MultiWriteStart (TIM_HandleTypeDef htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, const uint32_t BurstBuffer, uint32_t BurstLength, uint32_t DataLength)
	Configure the DMA Burst to transfer multiple Data from the memory to the TIM peripheral.

HAL_StatusTypeDef	HAL_TIM_DMABurst_WriteStop (TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
	Stops the TIM DMA Burst mode.

HAL_StatusTypeDef	HAL_TIM_DMABurst_ReadStart (TIM_HandleTypeDef htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, uint32_t BurstBuffer, uint32_t BurstLength)
	Configure the DMA Burst to transfer Data from the TIM peripheral to the memory.

HAL_StatusTypeDef	HAL_TIM_DMABurst_MultiReadStart (TIM_HandleTypeDef htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, uint32_t BurstBuffer, uint32_t BurstLength, uint32_t DataLength)
	Configure the DMA Burst to transfer Data from the TIM peripheral to the memory.

HAL_StatusTypeDef	HAL_TIM_DMABurst_ReadStop (TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
	Stop the DMA burst reading.

HAL_StatusTypeDef	HAL_TIM_GenerateEvent (TIM_HandleTypeDef *htim, uint32_t EventSource)
	Generate a software event.

uint32_t	HAL_TIM_ReadCapturedValue (const TIM_HandleTypeDef *htim, uint32_t Channel)
	Read the captured value from Capture Compare unit.

Detailed Description

Peripheral Control functions.

TIM Peripheral Control functions.

  ==============================================================================
                   ##### Peripheral Control functions #####
  ==============================================================================
 [..]
   This section provides functions allowing to:
      (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode.
      (+) Configure External Clock source.
      (+) Configure Complementary channels, break features and dead time.
      (+) Configure Master and the Slave synchronization.
      (+) Configure the DMA Burst Mode.

Function Documentation

◆ HAL_TIM_OC_ConfigChannel()

HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel	(	TIM_HandleTypeDef *	htim,
		const TIM_OC_InitTypeDef *	sConfig,
		uint32_t	Channel )

#include <stm32f4xx_hal_tim.h>

Initializes the TIM Output Compare Channels according to the specified parameters in the TIM_OC_InitTypeDef.

Parameters

htim	TIM Output Compare handle
sConfig	TIM Output Compare configuration structure
Channel	TIM Channels to configure This parameter can be one of the following values: TIM_CHANNEL_1: TIM Channel 1 selected TIM_CHANNEL_2: TIM Channel 2 selected TIM_CHANNEL_3: TIM Channel 3 selected TIM_CHANNEL_4: TIM Channel 4 selected

Return values

HAL status

Definition at line 4041 of file stm32f4xx_hal_tim.c.

References __HAL_LOCK, __HAL_UNLOCK, assert_param, HAL_ERROR, HAL_OK, TIM_HandleTypeDef::Instance, IS_TIM_CHANNELS, IS_TIM_OC_MODE, IS_TIM_OC_POLARITY, TIM_OC_InitTypeDef::OCMode, TIM_OC_InitTypeDef::OCPolarity, TIM_CHANNEL_1, TIM_CHANNEL_2, TIM_CHANNEL_3, TIM_CHANNEL_4, TIM_OC1_SetConfig(), TIM_OC2_SetConfig(), TIM_OC3_SetConfig(), and TIM_OC4_SetConfig().

◆ HAL_TIM_PWM_ConfigChannel()

HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel	(	TIM_HandleTypeDef *	htim,
		const TIM_OC_InitTypeDef *	sConfig,
		uint32_t	Channel )

#include <stm32f4xx_hal_tim.h>

Initializes the TIM PWM channels according to the specified parameters in the TIM_OC_InitTypeDef.

Parameters

htim	TIM PWM handle
sConfig	TIM PWM configuration structure
Channel	TIM Channels to be configured This parameter can be one of the following values: TIM_CHANNEL_1: TIM Channel 1 selected TIM_CHANNEL_2: TIM Channel 2 selected TIM_CHANNEL_3: TIM Channel 3 selected TIM_CHANNEL_4: TIM Channel 4 selected

Return values

HAL status

Definition at line 4219 of file stm32f4xx_hal_tim.c.

References __HAL_LOCK, __HAL_UNLOCK, assert_param, HAL_ERROR, HAL_OK, TIM_HandleTypeDef::Instance, IS_TIM_CHANNELS, IS_TIM_FAST_STATE, IS_TIM_OC_POLARITY, IS_TIM_PWM_MODE, TIM_OC_InitTypeDef::OCFastMode, TIM_OC_InitTypeDef::OCMode, TIM_OC_InitTypeDef::OCPolarity, TIM_CHANNEL_1, TIM_CHANNEL_2, TIM_CHANNEL_3, TIM_CHANNEL_4, TIM_OC1_SetConfig(), TIM_OC2_SetConfig(), TIM_OC3_SetConfig(), and TIM_OC4_SetConfig().

◆ HAL_TIM_IC_ConfigChannel()

HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel	(	TIM_HandleTypeDef *	htim,
		const TIM_IC_InitTypeDef *	sConfig,
		uint32_t	Channel )

#include <stm32f4xx_hal_tim.h>

Initializes the TIM Input Capture Channels according to the specified parameters in the TIM_IC_InitTypeDef.

Parameters

htim	TIM IC handle
sConfig	TIM Input Capture configuration structure
Channel	TIM Channel to configure This parameter can be one of the following values: TIM_CHANNEL_1: TIM Channel 1 selected TIM_CHANNEL_2: TIM Channel 2 selected TIM_CHANNEL_3: TIM Channel 3 selected TIM_CHANNEL_4: TIM Channel 4 selected

Return values

HAL status

Definition at line 4120 of file stm32f4xx_hal_tim.c.

References __HAL_LOCK, __HAL_UNLOCK, assert_param, HAL_ERROR, HAL_OK, TIM_IC_InitTypeDef::ICFilter, TIM_IC_InitTypeDef::ICPolarity, TIM_IC_InitTypeDef::ICPrescaler, TIM_IC_InitTypeDef::ICSelection, TIM_HandleTypeDef::Instance, IS_TIM_IC_FILTER, IS_TIM_IC_POLARITY, IS_TIM_IC_PRESCALER, IS_TIM_IC_SELECTION, TIM_CHANNEL_1, TIM_CHANNEL_2, TIM_CHANNEL_3, TIM_CHANNEL_4, TIM_TI1_SetConfig(), TIM_TI2_SetConfig(), TIM_TI3_SetConfig(), and TIM_TI4_SetConfig().

◆ HAL_TIM_OnePulse_ConfigChannel()

HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel	(	TIM_HandleTypeDef *	htim,
		TIM_OnePulse_InitTypeDef *	sConfig,
		uint32_t	OutputChannel,
		uint32_t	InputChannel )

#include <stm32f4xx_hal_tim.h>

Initializes the TIM One Pulse Channels according to the specified parameters in the TIM_OnePulse_InitTypeDef.

Parameters

htim	TIM One Pulse handle
sConfig	TIM One Pulse configuration structure
OutputChannel	TIM output channel to configure This parameter can be one of the following values: TIM_CHANNEL_1: TIM Channel 1 selected TIM_CHANNEL_2: TIM Channel 2 selected
InputChannel	TIM input Channel to configure This parameter can be one of the following values: TIM_CHANNEL_1: TIM Channel 1 selected TIM_CHANNEL_2: TIM Channel 2 selected

Note: To output a waveform with a minimum delay user can enable the fast mode by calling the __HAL_TIM_ENABLE_OCxFAST macro. Then CCx output is forced in response to the edge detection on TIx input, without taking in account the comparison.

Return values

HAL status

Definition at line 4333 of file stm32f4xx_hal_tim.c.

◆ HAL_TIM_ConfigOCrefClear()

HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear	(	TIM_HandleTypeDef *	htim,
		const TIM_ClearInputConfigTypeDef *	sClearInputConfig,
		uint32_t	Channel )

#include <stm32f4xx_hal_tim.h>

Configures the OCRef clear feature.

Parameters

htim	TIM handle
sClearInputConfig	pointer to a TIM_ClearInputConfigTypeDef structure that contains the OCREF clear feature and parameters for the TIM peripheral.
Channel	specifies the TIM Channel This parameter can be one of the following values: TIM_CHANNEL_1: TIM Channel 1 TIM_CHANNEL_2: TIM Channel 2 TIM_CHANNEL_3: TIM Channel 3 TIM_CHANNEL_4: TIM Channel 4

Return values

HAL status

Definition at line 5174 of file stm32f4xx_hal_tim.c.

References __HAL_LOCK, __HAL_UNLOCK, assert_param, TIM_ClearInputConfigTypeDef::ClearInputFilter, TIM_ClearInputConfigTypeDef::ClearInputPolarity, TIM_ClearInputConfigTypeDef::ClearInputPrescaler, TIM_ClearInputConfigTypeDef::ClearInputSource, TIM_ClearInputConfigTypeDef::ClearInputState, HAL_ERROR, HAL_OK, HAL_TIM_STATE_BUSY, HAL_TIM_STATE_READY, TIM_HandleTypeDef::Instance, IS_TIM_CLEARINPUT_FILTER, IS_TIM_CLEARINPUT_POLARITY, IS_TIM_CLEARINPUT_PRESCALER, IS_TIM_CLEARINPUT_SOURCE, TIM_HandleTypeDef::State, TIM_CHANNEL_1, TIM_CHANNEL_2, TIM_CHANNEL_3, TIM_CHANNEL_4, TIM_CLEARINPUTPRESCALER_DIV1, TIM_CLEARINPUTSOURCE_ETR, TIM_CLEARINPUTSOURCE_NONE, and TIM_ETR_SetConfig().

◆ HAL_TIM_ConfigClockSource()

HAL_StatusTypeDef HAL_TIM_ConfigClockSource	(	TIM_HandleTypeDef *	htim,
		const TIM_ClockConfigTypeDef *	sClockSourceConfig )

#include <stm32f4xx_hal_tim.h>

Configures the clock source to be used.

Parameters

htim	TIM handle
sClockSourceConfig	pointer to a TIM_ClockConfigTypeDef structure that contains the clock source information for the TIM peripheral.

Return values

HAL status

Definition at line 5304 of file stm32f4xx_hal_tim.c.

References __HAL_LOCK, __HAL_UNLOCK, assert_param, TIM_ClockConfigTypeDef::ClockFilter, TIM_ClockConfigTypeDef::ClockPolarity, TIM_ClockConfigTypeDef::ClockPrescaler, TIM_ClockConfigTypeDef::ClockSource, HAL_ERROR, HAL_OK, HAL_TIM_STATE_BUSY, HAL_TIM_STATE_READY, TIM_HandleTypeDef::Instance, IS_TIM_CLOCKFILTER, IS_TIM_CLOCKPOLARITY, IS_TIM_CLOCKPRESCALER, IS_TIM_CLOCKSOURCE, TIM_HandleTypeDef::State, TIM_CLOCKSOURCE_ETRMODE1, TIM_CLOCKSOURCE_ETRMODE2, TIM_CLOCKSOURCE_INTERNAL, TIM_CLOCKSOURCE_ITR0, TIM_CLOCKSOURCE_ITR1, TIM_CLOCKSOURCE_ITR2, TIM_CLOCKSOURCE_ITR3, TIM_CLOCKSOURCE_TI1, TIM_CLOCKSOURCE_TI1ED, TIM_CLOCKSOURCE_TI2, TIM_ETR_SetConfig(), TIM_ITRx_SetConfig(), TIM_SLAVEMODE_EXTERNAL1, TIM_TI1_ConfigInputStage(), and TIM_TI2_ConfigInputStage().

◆ HAL_TIM_ConfigTI1Input()

HAL_StatusTypeDef HAL_TIM_ConfigTI1Input	(	TIM_HandleTypeDef *	htim,
		uint32_t	TI1_Selection )

#include <stm32f4xx_hal_tim.h>

Selects the signal connected to the TI1 input: direct from CH1_input or a XOR combination between CH1_input, CH2_input & CH3_input.

Parameters

htim	TIM handle.
TI1_Selection	Indicate whether or not channel 1 is connected to the output of a XOR gate. This parameter can be one of the following values: TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3 pins are connected to the TI1 input (XOR combination)

Return values

HAL status

Definition at line 5458 of file stm32f4xx_hal_tim.c.

References assert_param, HAL_OK, TIM_HandleTypeDef::Instance, and IS_TIM_TI1SELECTION.

◆ HAL_TIM_SlaveConfigSynchro()

HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro	(	TIM_HandleTypeDef *	htim,
		const TIM_SlaveConfigTypeDef *	sSlaveConfig )

#include <stm32f4xx_hal_tim.h>

Configures the TIM in Slave mode.

Parameters

htim	TIM handle.
sSlaveConfig	pointer to a TIM_SlaveConfigTypeDef structure that contains the selected trigger (internal trigger input, filtered timer input or external trigger input) and the Slave mode (Disable, Reset, Gated, Trigger, External clock mode 1).

Return values

HAL status

Definition at line 5490 of file stm32f4xx_hal_tim.c.

References __HAL_LOCK, __HAL_TIM_DISABLE_DMA, __HAL_TIM_DISABLE_IT, __HAL_UNLOCK, assert_param, HAL_ERROR, HAL_OK, HAL_TIM_STATE_BUSY, HAL_TIM_STATE_READY, TIM_SlaveConfigTypeDef::InputTrigger, TIM_HandleTypeDef::Instance, IS_TIM_SLAVE_MODE, IS_TIM_TRIGGER_SELECTION, TIM_SlaveConfigTypeDef::SlaveMode, TIM_HandleTypeDef::State, TIM_DMA_TRIGGER, TIM_IT_TRIGGER, and TIM_SlaveTimer_SetConfig().

◆ HAL_TIM_SlaveConfigSynchro_IT()

HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT	(	TIM_HandleTypeDef *	htim,
		const TIM_SlaveConfigTypeDef *	sSlaveConfig )

#include <stm32f4xx_hal_tim.h>

Configures the TIM in Slave mode in interrupt mode.

Parameters

htim	TIM handle.
sSlaveConfig	pointer to a TIM_SlaveConfigTypeDef structure that contains the selected trigger (internal trigger input, filtered timer input or external trigger input) and the Slave mode (Disable, Reset, Gated, Trigger, External clock mode 1).

Return values

HAL status

Definition at line 5530 of file stm32f4xx_hal_tim.c.

References __HAL_LOCK, __HAL_TIM_DISABLE_DMA, __HAL_TIM_ENABLE_IT, __HAL_UNLOCK, assert_param, HAL_ERROR, HAL_OK, HAL_TIM_STATE_BUSY, HAL_TIM_STATE_READY, TIM_SlaveConfigTypeDef::InputTrigger, TIM_HandleTypeDef::Instance, IS_TIM_SLAVE_MODE, IS_TIM_TRIGGER_SELECTION, TIM_SlaveConfigTypeDef::SlaveMode, TIM_HandleTypeDef::State, TIM_DMA_TRIGGER, TIM_IT_TRIGGER, and TIM_SlaveTimer_SetConfig().

◆ HAL_TIM_DMABurst_WriteStart()

HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart	(	TIM_HandleTypeDef *	htim,
		uint32_t	BurstBaseAddress,
		uint32_t	BurstRequestSrc,
		const uint32_t *	BurstBuffer,
		uint32_t	BurstLength )

#include <stm32f4xx_hal_tim.h>

Configure the DMA Burst to transfer Data from the memory to the TIM peripheral.

Parameters

htim	TIM handle
BurstBaseAddress	TIM Base address from where the DMA will start the Data write This parameter can be one of the following values: TIM_DMABASE_CR1 TIM_DMABASE_CR2 TIM_DMABASE_SMCR TIM_DMABASE_DIER TIM_DMABASE_SR TIM_DMABASE_EGR TIM_DMABASE_CCMR1 TIM_DMABASE_CCMR2 TIM_DMABASE_CCER TIM_DMABASE_CNT TIM_DMABASE_PSC TIM_DMABASE_ARR TIM_DMABASE_RCR TIM_DMABASE_CCR1 TIM_DMABASE_CCR2 TIM_DMABASE_CCR3 TIM_DMABASE_CCR4 TIM_DMABASE_BDTR
BurstRequestSrc	TIM DMA Request sources This parameter can be one of the following values: TIM_DMA_UPDATE: TIM update Interrupt source TIM_DMA_CC1: TIM Capture Compare 1 DMA source TIM_DMA_CC2: TIM Capture Compare 2 DMA source TIM_DMA_CC3: TIM Capture Compare 3 DMA source TIM_DMA_CC4: TIM Capture Compare 4 DMA source TIM_DMA_COM: TIM Commutation DMA source TIM_DMA_TRIGGER: TIM Trigger DMA source
BurstBuffer	The Buffer address.
BurstLength	DMA Burst length. This parameter can be one value between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.

Note: This function should be used only when BurstLength is equal to DMA data transfer length.

Return values

HAL status

Definition at line 4481 of file stm32f4xx_hal_tim.c.

References HAL_TIM_DMABurst_MultiWriteStart().

◆ HAL_TIM_DMABurst_MultiWriteStart()

HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart	(	TIM_HandleTypeDef *	htim,
		uint32_t	BurstBaseAddress,
		uint32_t	BurstRequestSrc,
		const uint32_t *	BurstBuffer,
		uint32_t	BurstLength,
		uint32_t	DataLength )

#include <stm32f4xx_hal_tim.h>

Configure the DMA Burst to transfer multiple Data from the memory to the TIM peripheral.

Parameters

htim	TIM handle
BurstBaseAddress	TIM Base address from where the DMA will start the Data write This parameter can be one of the following values: TIM_DMABASE_CR1 TIM_DMABASE_CR2 TIM_DMABASE_SMCR TIM_DMABASE_DIER TIM_DMABASE_SR TIM_DMABASE_EGR TIM_DMABASE_CCMR1 TIM_DMABASE_CCMR2 TIM_DMABASE_CCER TIM_DMABASE_CNT TIM_DMABASE_PSC TIM_DMABASE_ARR TIM_DMABASE_RCR TIM_DMABASE_CCR1 TIM_DMABASE_CCR2 TIM_DMABASE_CCR3 TIM_DMABASE_CCR4 TIM_DMABASE_BDTR
BurstRequestSrc	TIM DMA Request sources This parameter can be one of the following values: TIM_DMA_UPDATE: TIM update Interrupt source TIM_DMA_CC1: TIM Capture Compare 1 DMA source TIM_DMA_CC2: TIM Capture Compare 2 DMA source TIM_DMA_CC3: TIM Capture Compare 3 DMA source TIM_DMA_CC4: TIM Capture Compare 4 DMA source TIM_DMA_COM: TIM Commutation DMA source TIM_DMA_TRIGGER: TIM Trigger DMA source
BurstBuffer	The Buffer address.
BurstLength	DMA Burst length. This parameter can be one value between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
DataLength	Data length. This parameter can be one value between 1 and 0xFFFF.

Return values

HAL status

Definition at line 4534 of file stm32f4xx_hal_tim.c.

References __HAL_TIM_ENABLE_DMA, assert_param, TIM_HandleTypeDef::DMABurstState, HAL_BUSY, HAL_DMA_BURST_STATE_BUSY, HAL_DMA_BURST_STATE_READY, HAL_DMA_Start_IT(), HAL_ERROR, HAL_OK, TIM_HandleTypeDef::hdma, TIM_HandleTypeDef::Instance, IS_TIM_DMA_BASE, IS_TIM_DMA_DATA_LENGTH, IS_TIM_DMA_LENGTH, IS_TIM_DMA_SOURCE, TIM_DMA_CC1, TIM_DMA_CC2, TIM_DMA_CC3, TIM_DMA_CC4, TIM_DMA_COM, TIM_DMA_ID_CC1, TIM_DMA_ID_CC2, TIM_DMA_ID_CC3, TIM_DMA_ID_CC4, TIM_DMA_ID_COMMUTATION, TIM_DMA_ID_TRIGGER, TIM_DMA_ID_UPDATE, TIM_DMA_TRIGGER, TIM_DMA_UPDATE, TIM_DMADelayPulseCplt(), TIM_DMADelayPulseHalfCplt(), TIM_DMAError(), TIM_DMAPeriodElapsedCplt(), TIM_DMAPeriodElapsedHalfCplt(), TIM_DMATriggerCplt(), TIM_DMATriggerHalfCplt(), TIMEx_DMACommutationCplt(), TIMEx_DMACommutationHalfCplt(), __DMA_HandleTypeDef::XferCpltCallback, __DMA_HandleTypeDef::XferErrorCallback, and __DMA_HandleTypeDef::XferHalfCpltCallback.

Referenced by HAL_TIM_DMABurst_WriteStart().

◆ HAL_TIM_DMABurst_WriteStop()

HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop	(	TIM_HandleTypeDef *	htim,
		uint32_t	BurstRequestSrc )

#include <stm32f4xx_hal_tim.h>

Stops the TIM DMA Burst mode.

Parameters

htim	TIM handle
BurstRequestSrc	TIM DMA Request sources to disable

Return values

HAL status

Definition at line 4718 of file stm32f4xx_hal_tim.c.

References __HAL_TIM_DISABLE_DMA, assert_param, TIM_HandleTypeDef::DMABurstState, HAL_DMA_Abort_IT(), HAL_DMA_BURST_STATE_READY, HAL_ERROR, HAL_OK, TIM_HandleTypeDef::hdma, IS_TIM_DMA_SOURCE, TIM_DMA_CC1, TIM_DMA_CC2, TIM_DMA_CC3, TIM_DMA_CC4, TIM_DMA_COM, TIM_DMA_ID_CC1, TIM_DMA_ID_CC2, TIM_DMA_ID_CC3, TIM_DMA_ID_CC4, TIM_DMA_ID_COMMUTATION, TIM_DMA_ID_TRIGGER, TIM_DMA_ID_UPDATE, TIM_DMA_TRIGGER, and TIM_DMA_UPDATE.

◆ HAL_TIM_DMABurst_ReadStart()

HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart	(	TIM_HandleTypeDef *	htim,
		uint32_t	BurstBaseAddress,
		uint32_t	BurstRequestSrc,
		uint32_t *	BurstBuffer,
		uint32_t	BurstLength )

#include <stm32f4xx_hal_tim.h>

Configure the DMA Burst to transfer Data from the TIM peripheral to the memory.

Parameters

htim	TIM handle
BurstBaseAddress	TIM Base address from where the DMA will start the Data read This parameter can be one of the following values: TIM_DMABASE_CR1 TIM_DMABASE_CR2 TIM_DMABASE_SMCR TIM_DMABASE_DIER TIM_DMABASE_SR TIM_DMABASE_EGR TIM_DMABASE_CCMR1 TIM_DMABASE_CCMR2 TIM_DMABASE_CCER TIM_DMABASE_CNT TIM_DMABASE_PSC TIM_DMABASE_ARR TIM_DMABASE_RCR TIM_DMABASE_CCR1 TIM_DMABASE_CCR2 TIM_DMABASE_CCR3 TIM_DMABASE_CCR4 TIM_DMABASE_BDTR
BurstRequestSrc	TIM DMA Request sources This parameter can be one of the following values: TIM_DMA_UPDATE: TIM update Interrupt source TIM_DMA_CC1: TIM Capture Compare 1 DMA source TIM_DMA_CC2: TIM Capture Compare 2 DMA source TIM_DMA_CC3: TIM Capture Compare 3 DMA source TIM_DMA_CC4: TIM Capture Compare 4 DMA source TIM_DMA_COM: TIM Commutation DMA source TIM_DMA_TRIGGER: TIM Trigger DMA source
BurstBuffer	The Buffer address.
BurstLength	DMA Burst length. This parameter can be one value between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.

Note: This function should be used only when BurstLength is equal to DMA data transfer length.

Return values

HAL status

Definition at line 4819 of file stm32f4xx_hal_tim.c.

References HAL_TIM_DMABurst_MultiReadStart().

◆ HAL_TIM_DMABurst_MultiReadStart()

HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart	(	TIM_HandleTypeDef *	htim,
		uint32_t	BurstBaseAddress,
		uint32_t	BurstRequestSrc,
		uint32_t *	BurstBuffer,
		uint32_t	BurstLength,
		uint32_t	DataLength )

#include <stm32f4xx_hal_tim.h>

Configure the DMA Burst to transfer Data from the TIM peripheral to the memory.

Parameters

htim	TIM handle
BurstBaseAddress	TIM Base address from where the DMA will start the Data read This parameter can be one of the following values: TIM_DMABASE_CR1 TIM_DMABASE_CR2 TIM_DMABASE_SMCR TIM_DMABASE_DIER TIM_DMABASE_SR TIM_DMABASE_EGR TIM_DMABASE_CCMR1 TIM_DMABASE_CCMR2 TIM_DMABASE_CCER TIM_DMABASE_CNT TIM_DMABASE_PSC TIM_DMABASE_ARR TIM_DMABASE_RCR TIM_DMABASE_CCR1 TIM_DMABASE_CCR2 TIM_DMABASE_CCR3 TIM_DMABASE_CCR4 TIM_DMABASE_BDTR
BurstRequestSrc	TIM DMA Request sources This parameter can be one of the following values: TIM_DMA_UPDATE: TIM update Interrupt source TIM_DMA_CC1: TIM Capture Compare 1 DMA source TIM_DMA_CC2: TIM Capture Compare 2 DMA source TIM_DMA_CC3: TIM Capture Compare 3 DMA source TIM_DMA_CC4: TIM Capture Compare 4 DMA source TIM_DMA_COM: TIM Commutation DMA source TIM_DMA_TRIGGER: TIM Trigger DMA source
BurstBuffer	The Buffer address.
BurstLength	DMA Burst length. This parameter can be one value between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
DataLength	Data length. This parameter can be one value between 1 and 0xFFFF.

Return values

HAL status

Definition at line 4870 of file stm32f4xx_hal_tim.c.

References __HAL_TIM_ENABLE_DMA, assert_param, TIM_HandleTypeDef::DMABurstState, HAL_BUSY, HAL_DMA_BURST_STATE_BUSY, HAL_DMA_BURST_STATE_READY, HAL_DMA_Start_IT(), HAL_ERROR, HAL_OK, TIM_HandleTypeDef::hdma, TIM_HandleTypeDef::Instance, IS_TIM_DMA_BASE, IS_TIM_DMA_DATA_LENGTH, IS_TIM_DMA_LENGTH, IS_TIM_DMA_SOURCE, TIM_DMA_CC1, TIM_DMA_CC2, TIM_DMA_CC3, TIM_DMA_CC4, TIM_DMA_COM, TIM_DMA_ID_CC1, TIM_DMA_ID_CC2, TIM_DMA_ID_CC3, TIM_DMA_ID_CC4, TIM_DMA_ID_COMMUTATION, TIM_DMA_ID_TRIGGER, TIM_DMA_ID_UPDATE, TIM_DMA_TRIGGER, TIM_DMA_UPDATE, TIM_DMACaptureCplt(), TIM_DMACaptureHalfCplt(), TIM_DMAError(), TIM_DMAPeriodElapsedCplt(), TIM_DMAPeriodElapsedHalfCplt(), TIM_DMATriggerCplt(), TIM_DMATriggerHalfCplt(), TIMEx_DMACommutationCplt(), TIMEx_DMACommutationHalfCplt(), __DMA_HandleTypeDef::XferCpltCallback, __DMA_HandleTypeDef::XferErrorCallback, and __DMA_HandleTypeDef::XferHalfCpltCallback.

Referenced by HAL_TIM_DMABurst_ReadStart().

◆ HAL_TIM_DMABurst_ReadStop()

HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop	(	TIM_HandleTypeDef *	htim,
		uint32_t	BurstRequestSrc )

#include <stm32f4xx_hal_tim.h>

Stop the DMA burst reading.

Parameters

htim	TIM handle
BurstRequestSrc	TIM DMA Request sources to disable.

Return values

HAL status

Definition at line 5054 of file stm32f4xx_hal_tim.c.

References __HAL_TIM_DISABLE_DMA, assert_param, TIM_HandleTypeDef::DMABurstState, HAL_DMA_Abort_IT(), HAL_DMA_BURST_STATE_READY, HAL_ERROR, HAL_OK, TIM_HandleTypeDef::hdma, IS_TIM_DMA_SOURCE, TIM_DMA_CC1, TIM_DMA_CC2, TIM_DMA_CC3, TIM_DMA_CC4, TIM_DMA_COM, TIM_DMA_ID_CC1, TIM_DMA_ID_CC2, TIM_DMA_ID_CC3, TIM_DMA_ID_CC4, TIM_DMA_ID_COMMUTATION, TIM_DMA_ID_TRIGGER, TIM_DMA_ID_UPDATE, TIM_DMA_TRIGGER, and TIM_DMA_UPDATE.

◆ HAL_TIM_GenerateEvent()

HAL_StatusTypeDef HAL_TIM_GenerateEvent	(	TIM_HandleTypeDef *	htim,
		uint32_t	EventSource )

#include <stm32f4xx_hal_tim.h>

Generate a software event.

Parameters

htim TIM handle

EventSource

specifies the event source. This parameter can be one of the following values:

TIM_EVENTSOURCE_UPDATE: Timer update Event source
TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source
TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source
TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source
TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source
TIM_EVENTSOURCE_COM: Timer COM event source
TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source
TIM_EVENTSOURCE_BREAK: Timer Break event source

Note: Basic timers can only generate an update event.; TIM_EVENTSOURCE_COM is relevant only with advanced timer instances.; TIM_EVENTSOURCE_BREAK are relevant only for timer instances supporting a break input.

Return values

HAL status

Definition at line 5137 of file stm32f4xx_hal_tim.c.

References __HAL_LOCK, __HAL_UNLOCK, assert_param, HAL_OK, HAL_TIM_STATE_BUSY, HAL_TIM_STATE_READY, TIM_HandleTypeDef::Instance, IS_TIM_EVENT_SOURCE, and TIM_HandleTypeDef::State.

◆ HAL_TIM_ReadCapturedValue()

uint32_t HAL_TIM_ReadCapturedValue	(	const TIM_HandleTypeDef *	htim,
		uint32_t	Channel )

#include <stm32f4xx_hal_tim.h>

Read the captured value from Capture Compare unit.

Parameters

htim	TIM handle.
Channel	TIM Channels to be enabled This parameter can be one of the following values: TIM_CHANNEL_1: TIM Channel 1 selected TIM_CHANNEL_2: TIM Channel 2 selected TIM_CHANNEL_3: TIM Channel 3 selected TIM_CHANNEL_4: TIM Channel 4 selected

Return values

Captured value

Definition at line 5573 of file stm32f4xx_hal_tim.c.

References assert_param, TIM_HandleTypeDef::Instance, TIM_CHANNEL_1, TIM_CHANNEL_2, TIM_CHANNEL_3, and TIM_CHANNEL_4.

Functions

Detailed Description

Function Documentation

◆ HAL_TIM_OC_ConfigChannel()

◆ HAL_TIM_PWM_ConfigChannel()

◆ HAL_TIM_IC_ConfigChannel()

◆ HAL_TIM_OnePulse_ConfigChannel()

◆ HAL_TIM_ConfigOCrefClear()

◆ HAL_TIM_ConfigClockSource()

◆ HAL_TIM_ConfigTI1Input()

◆ HAL_TIM_SlaveConfigSynchro()

◆ HAL_TIM_SlaveConfigSynchro_IT()

◆ HAL_TIM_DMABurst_WriteStart()

◆ HAL_TIM_DMABurst_MultiWriteStart()

◆ HAL_TIM_DMABurst_WriteStop()

◆ HAL_TIM_DMABurst_ReadStart()

◆ HAL_TIM_DMABurst_MultiReadStart()

◆ HAL_TIM_DMABurst_ReadStop()

◆ HAL_TIM_GenerateEvent()

◆ HAL_TIM_ReadCapturedValue()