STM32F4xx HAL Documentation
Hardware Abstraction Layer for STM32F4 familiy
|
#include <stm32f4xx_hal_fmpi2c.h>
Data Fields | |
uint32_t | Timing |
uint32_t | OwnAddress1 |
uint32_t | AddressingMode |
uint32_t | DualAddressMode |
uint32_t | OwnAddress2 |
uint32_t | OwnAddress2Masks |
uint32_t | GeneralCallMode |
uint32_t | NoStretchMode |
Definition at line 48 of file stm32f4xx_hal_fmpi2c.h.
uint32_t FMPI2C_InitTypeDef::Timing |
Specifies the FMPI2C_TIMINGR_register value. This parameter calculated by referring to FMPI2C initialization section in Reference manual
Definition at line 50 of file stm32f4xx_hal_fmpi2c.h.
Referenced by HAL_FMPI2C_Init().
uint32_t FMPI2C_InitTypeDef::OwnAddress1 |
Specifies the first device own address. This parameter can be a 7-bit or 10-bit address.
Definition at line 54 of file stm32f4xx_hal_fmpi2c.h.
Referenced by HAL_FMPI2C_Init().
uint32_t FMPI2C_InitTypeDef::AddressingMode |
Specifies if 7-bit or 10-bit addressing mode is selected. This parameter can be a value of FMPI2C Addressing Mode
Definition at line 57 of file stm32f4xx_hal_fmpi2c.h.
Referenced by FMPI2C_ITAddrCplt(), HAL_FMPI2C_Init(), HAL_FMPI2C_IsDeviceReady(), and HAL_FMPI2C_Slave_Transmit().
uint32_t FMPI2C_InitTypeDef::DualAddressMode |
Specifies if dual addressing mode is selected. This parameter can be a value of FMPI2C Dual Addressing Mode
Definition at line 60 of file stm32f4xx_hal_fmpi2c.h.
Referenced by HAL_FMPI2C_Init().
uint32_t FMPI2C_InitTypeDef::OwnAddress2 |
Specifies the second device own address if dual addressing mode is selected This parameter can be a 7-bit address.
Definition at line 63 of file stm32f4xx_hal_fmpi2c.h.
Referenced by HAL_FMPI2C_Init().
uint32_t FMPI2C_InitTypeDef::OwnAddress2Masks |
Specifies the acknowledge mask address second device own address if dual addressing mode is selected. This parameter can be a value of FMPI2C Own Address2 Masks
Definition at line 66 of file stm32f4xx_hal_fmpi2c.h.
Referenced by HAL_FMPI2C_Init().
uint32_t FMPI2C_InitTypeDef::GeneralCallMode |
Specifies if general call mode is selected. This parameter can be a value of FMPI2C General Call Addressing Mode
Definition at line 70 of file stm32f4xx_hal_fmpi2c.h.
Referenced by HAL_FMPI2C_Init().
uint32_t FMPI2C_InitTypeDef::NoStretchMode |
Specifies if nostretch mode is selected. This parameter can be a value of FMPI2C No-Stretch Mode
Definition at line 73 of file stm32f4xx_hal_fmpi2c.h.
Referenced by HAL_FMPI2C_Init(), HAL_FMPI2C_Slave_Transmit(), HAL_FMPI2C_Slave_Transmit_DMA(), and HAL_FMPI2C_Slave_Transmit_IT().