TIM_Base_InitTypeDef Struct Reference

TIM Time base Configuration Structure definition. More...

#include <stm32f4xx_hal_tim.h>

Collaboration diagram for TIM_Base_InitTypeDef:

Data Fields
uint32_t	Prescaler
uint32_t	CounterMode
uint32_t	Period
uint32_t	ClockDivision
uint32_t	RepetitionCounter
uint32_t	AutoReloadPreload

Detailed Description

TIM Time base Configuration Structure definition.

Definition at line 46 of file stm32f4xx_hal_tim.h.

Field Documentation

Prescaler

uint32_t TIM_Base_InitTypeDef::Prescaler

Specifies the prescaler value used to divide the TIM clock. This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF

Definition at line 48 of file stm32f4xx_hal_tim.h.

Referenced by HAL_InitTick(), and TIM_Base_SetConfig().

CounterMode

uint32_t TIM_Base_InitTypeDef::CounterMode

Specifies the counter mode. This parameter can be a value of TIM Counter Mode

Definition at line 51 of file stm32f4xx_hal_tim.h.

Referenced by HAL_InitTick(), HAL_TIM_Base_Init(), HAL_TIM_Encoder_Init(), HAL_TIM_IC_Init(), HAL_TIM_OC_Init(), HAL_TIM_OnePulse_Init(), HAL_TIM_PWM_Init(), HAL_TIMEx_HallSensor_Init(), and TIM_Base_SetConfig().

Period

uint32_t TIM_Base_InitTypeDef::Period

Specifies the period value to be loaded into the active Auto-Reload Register at the next update event. This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF.

Definition at line 54 of file stm32f4xx_hal_tim.h.

Referenced by HAL_InitTick(), HAL_TIM_Base_Init(), HAL_TIM_Encoder_Init(), HAL_TIM_IC_Init(), HAL_TIM_OC_Init(), HAL_TIM_OnePulse_Init(), HAL_TIM_PWM_Init(), HAL_TIMEx_HallSensor_Init(), and TIM_Base_SetConfig().

ClockDivision

uint32_t TIM_Base_InitTypeDef::ClockDivision

Specifies the clock division. This parameter can be a value of TIM Clock Division

Definition at line 58 of file stm32f4xx_hal_tim.h.

Referenced by HAL_InitTick(), HAL_TIM_Base_Init(), HAL_TIM_Encoder_Init(), HAL_TIM_IC_Init(), HAL_TIM_OC_Init(), HAL_TIM_OnePulse_Init(), HAL_TIM_PWM_Init(), HAL_TIMEx_HallSensor_Init(), and TIM_Base_SetConfig().

RepetitionCounter

uint32_t TIM_Base_InitTypeDef::RepetitionCounter

Specifies the repetition counter value. Each time the RCR downcounter reaches zero, an update event is generated and counting restarts from the RCR value (N). This means in PWM mode that (N+1) corresponds to:

• the number of PWM periods in edge-aligned mode
• the number of half PWM period in center-aligned mode GP timers: this parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. Advanced timers: this parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF.

Definition at line 61 of file stm32f4xx_hal_tim.h.

Referenced by TIM_Base_SetConfig().

AutoReloadPreload

uint32_t TIM_Base_InitTypeDef::AutoReloadPreload

Specifies the auto-reload preload. This parameter can be a value of TIM Auto-Reload Preload

Definition at line 72 of file stm32f4xx_hal_tim.h.

Referenced by HAL_InitTick(), HAL_TIM_Base_Init(), HAL_TIM_Encoder_Init(), HAL_TIM_IC_Init(), HAL_TIM_OC_Init(), HAL_TIM_OnePulse_Init(), HAL_TIM_PWM_Init(), HAL_TIMEx_HallSensor_Init(), and TIM_Base_SetConfig().

---

The documentation for this struct was generated from the following file:

• stm32f4xx_hal_tim.h