RCCEx

RCCEx HAL module driver. More...

Collaboration diagram for RCCEx:

Topics
	RCCEx Exported Types
	RCCEx Exported Constants
	RCCEx Exported Macros
	RCCEx Private Constants
	RCCEx Private Macros
	RCCEx Exported Functions

Functions
HAL_StatusTypeDef	HAL_RCC_DeInit (void)
	Resets the RCC clock configuration to the default reset state.
HAL_StatusTypeDef	HAL_RCC_OscConfig (RCC_OscInitTypeDef *RCC_OscInitStruct)
	Initializes the RCC Oscillators according to the specified parameters in the RCC_OscInitTypeDef.
void	HAL_RCC_GetOscConfig (RCC_OscInitTypeDef *RCC_OscInitStruct)
	Configures the RCC_OscInitStruct according to the internal RCC configuration registers.

Detailed Description

RCCEx HAL module driver.

Function Documentation

HAL_RCC_DeInit()

HAL_StatusTypeDef HAL_RCC_DeInit

(

void

)

#include <stm32f4xx_hal_rcc_ex.c>

Resets the RCC clock configuration to the default reset state.

Note

The default reset state of the clock configuration is given below:

• HSI ON and used as system clock source
• HSE, PLL, PLLI2S and PLLSAI OFF
• AHB, APB1 and APB2 prescaler set to 1.
• CSS, MCO1 and MCO2 OFF
• All interrupts disabled

This function doesn't modify the configuration of the

• Peripheral clocks
• LSI, LSE and RTC clocks

Return values

HAL

status

Definition at line 3186 of file stm32f4xx_hal_rcc_ex.c.

References CLOCKSWITCH_TIMEOUT_VALUE, HAL_ERROR, HAL_GetTick(), HAL_InitTick(), HAL_OK, HAL_TIMEOUT, HSE_TIMEOUT_VALUE, HSI_TIMEOUT_VALUE, HSI_VALUE, PLL_TIMEOUT_VALUE, PLLI2S_TIMEOUT_VALUE, PLLSAI_TIMEOUT_VALUE, and uwTickPrio.

HAL_RCC_OscConfig()

HAL_StatusTypeDef HAL_RCC_OscConfig

(

RCC_OscInitTypeDef *

RCC_OscInitStruct

)

#include <stm32f4xx_hal_rcc_ex.c>

Initializes the RCC Oscillators according to the specified parameters in the RCC_OscInitTypeDef.

Parameters

RCC_OscInitStruct

pointer to an RCC_OscInitTypeDef structure that contains the configuration information for the RCC Oscillators.

Note

The PLL is not disabled when used as system clock.

Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not supported by this API. User should request a transition to LSE Off first and then LSE On or LSE Bypass.

Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not supported by this API. User should request a transition to HSE Off first and then HSE On or HSE Bypass.

This function add the PLL/PLLR factor management during PLL configuration this feature is only available in STM32F410xx/STM32F446xx/STM32F469xx/STM32F479xx/STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx devices

Return values

HAL

status

Definition at line 3377 of file stm32f4xx_hal_rcc_ex.c.

References __HAL_RCC_GET_FLAG, __HAL_RCC_GET_SYSCLK_SOURCE, __HAL_RCC_HSE_CONFIG, __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST, __HAL_RCC_HSI_DISABLE, __HAL_RCC_HSI_ENABLE, __HAL_RCC_LSE_CONFIG, __HAL_RCC_LSI_DISABLE, __HAL_RCC_LSI_ENABLE, __HAL_RCC_PLL_DISABLE, __HAL_RCC_PLL_ENABLE, __HAL_RCC_PWR_CLK_DISABLE, __HAL_RCC_PWR_CLK_ENABLE, __HAL_RCC_PWR_IS_CLK_DISABLED, assert_param, HAL_ERROR, HAL_GetTick(), HAL_IS_BIT_CLR, HAL_OK, HAL_TIMEOUT, HSE_TIMEOUT_VALUE, RCC_OscInitTypeDef::HSEState, HSI_TIMEOUT_VALUE, RCC_OscInitTypeDef::HSICalibrationValue, RCC_OscInitTypeDef::HSIState, IS_RCC_CALIBRATION_VALUE, IS_RCC_HSE, IS_RCC_HSI, IS_RCC_LSE, IS_RCC_LSI, IS_RCC_OSCILLATORTYPE, IS_RCC_PLL, IS_RCC_PLLM_VALUE, IS_RCC_PLLN_VALUE, IS_RCC_PLLP_VALUE, IS_RCC_PLLQ_VALUE, IS_RCC_PLLR_VALUE, IS_RCC_PLLSOURCE, RCC_OscInitTypeDef::LSEState, LSI_TIMEOUT_VALUE, RCC_OscInitTypeDef::LSIState, RCC_OscInitTypeDef::OscillatorType, RCC_OscInitTypeDef::PLL, PLL_TIMEOUT_VALUE, RCC_PLLInitTypeDef::PLLM, RCC_PLLInitTypeDef::PLLN, RCC_PLLInitTypeDef::PLLP, RCC_PLLInitTypeDef::PLLQ, RCC_PLLInitTypeDef::PLLR, RCC_PLLInitTypeDef::PLLSource, RCC_PLLInitTypeDef::PLLState, RCC_DBP_TIMEOUT_VALUE, RCC_FLAG_HSERDY, RCC_FLAG_HSIRDY, RCC_FLAG_LSERDY, RCC_FLAG_LSIRDY, RCC_FLAG_PLLRDY, RCC_HSE_OFF, RCC_HSI_OFF, RCC_HSI_ON, RCC_LSE_OFF, RCC_LSE_TIMEOUT_VALUE, RCC_LSI_OFF, RCC_OSCILLATORTYPE_HSE, RCC_OSCILLATORTYPE_HSI, RCC_OSCILLATORTYPE_LSE, RCC_OSCILLATORTYPE_LSI, RCC_PLL_NONE, RCC_PLL_OFF, and RCC_PLL_ON.

HAL_RCC_GetOscConfig()

void HAL_RCC_GetOscConfig

(

RCC_OscInitTypeDef *

RCC_OscInitStruct

)

#include <stm32f4xx_hal_rcc_ex.c>

Configures the RCC_OscInitStruct according to the internal RCC configuration registers.

Parameters

RCC_OscInitStruct

pointer to an RCC_OscInitTypeDef structure that will be configured.

Note

This function is only available in case of STM32F410xx/STM32F446xx/STM32F469xx/STM32F479xx/STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx devices.

This function add the PLL/PLLR factor management

Return values

None

Definition at line 3752 of file stm32f4xx_hal_rcc_ex.c.

References RCC_OscInitTypeDef::HSEState, RCC_OscInitTypeDef::HSICalibrationValue, RCC_OscInitTypeDef::HSIState, RCC_OscInitTypeDef::LSEState, RCC_OscInitTypeDef::LSIState, RCC_OscInitTypeDef::OscillatorType, RCC_OscInitTypeDef::PLL, RCC_PLLInitTypeDef::PLLM, RCC_PLLInitTypeDef::PLLN, RCC_PLLInitTypeDef::PLLP, RCC_PLLInitTypeDef::PLLQ, RCC_PLLInitTypeDef::PLLR, RCC_PLLInitTypeDef::PLLSource, RCC_PLLInitTypeDef::PLLState, RCC_HSE_BYPASS, RCC_HSE_OFF, RCC_HSE_ON, RCC_HSI_OFF, RCC_HSI_ON, RCC_LSE_BYPASS, RCC_LSE_OFF, RCC_LSE_ON, RCC_LSI_OFF, RCC_LSI_ON, RCC_OSCILLATORTYPE_HSE, RCC_OSCILLATORTYPE_HSI, RCC_OSCILLATORTYPE_LSE, RCC_OSCILLATORTYPE_LSI, RCC_PLL_OFF, and RCC_PLL_ON.