STM32F4xx HAL Documentation
Hardware Abstraction Layer for STM32F4 familiy
|
Header file of I2S HAL module. More...
Go to the source code of this file.
Data Structures | |
struct | I2S_InitTypeDef |
I2S Init structure definition. More... | |
struct | __I2S_HandleTypeDef |
I2S handle Structure definition. More... | |
Macros | |
#define | HAL_I2S_ERROR_NONE (0x00000000U) |
#define | HAL_I2S_ERROR_TIMEOUT (0x00000001U) |
#define | HAL_I2S_ERROR_OVR (0x00000002U) |
#define | HAL_I2S_ERROR_UDR (0x00000004U) |
#define | HAL_I2S_ERROR_DMA (0x00000008U) |
#define | HAL_I2S_ERROR_PRESCALER (0x00000010U) |
#define | HAL_I2S_ERROR_BUSY_LINE_RX (0x00000040U) |
#define | I2S_MODE_SLAVE_TX (0x00000000U) |
#define | I2S_MODE_SLAVE_RX (SPI_I2SCFGR_I2SCFG_0) |
#define | I2S_MODE_MASTER_TX (SPI_I2SCFGR_I2SCFG_1) |
#define | I2S_MODE_MASTER_RX ((SPI_I2SCFGR_I2SCFG_0 | SPI_I2SCFGR_I2SCFG_1)) |
#define | I2S_STANDARD_PHILIPS (0x00000000U) |
#define | I2S_STANDARD_MSB (SPI_I2SCFGR_I2SSTD_0) |
#define | I2S_STANDARD_LSB (SPI_I2SCFGR_I2SSTD_1) |
#define | I2S_STANDARD_PCM_SHORT ((SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1)) |
#define | I2S_STANDARD_PCM_LONG ((SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1 | SPI_I2SCFGR_PCMSYNC)) |
#define | I2S_DATAFORMAT_16B (0x00000000U) |
#define | I2S_DATAFORMAT_16B_EXTENDED (SPI_I2SCFGR_CHLEN) |
#define | I2S_DATAFORMAT_24B ((SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_0)) |
#define | I2S_DATAFORMAT_32B ((SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_1)) |
#define | I2S_MCLKOUTPUT_ENABLE (SPI_I2SPR_MCKOE) |
#define | I2S_MCLKOUTPUT_DISABLE (0x00000000U) |
#define | I2S_AUDIOFREQ_192K (192000U) |
#define | I2S_AUDIOFREQ_96K (96000U) |
#define | I2S_AUDIOFREQ_48K (48000U) |
#define | I2S_AUDIOFREQ_44K (44100U) |
#define | I2S_AUDIOFREQ_32K (32000U) |
#define | I2S_AUDIOFREQ_22K (22050U) |
#define | I2S_AUDIOFREQ_16K (16000U) |
#define | I2S_AUDIOFREQ_11K (11025U) |
#define | I2S_AUDIOFREQ_8K (8000U) |
#define | I2S_AUDIOFREQ_DEFAULT (2U) |
#define | I2S_FULLDUPLEXMODE_DISABLE (0x00000000U) |
#define | I2S_FULLDUPLEXMODE_ENABLE (0x00000001U) |
#define | I2S_CPOL_LOW (0x00000000U) |
#define | I2S_CPOL_HIGH (SPI_I2SCFGR_CKPOL) |
#define | I2S_IT_TXE SPI_CR2_TXEIE |
#define | I2S_IT_RXNE SPI_CR2_RXNEIE |
#define | I2S_IT_ERR SPI_CR2_ERRIE |
#define | I2S_FLAG_TXE SPI_SR_TXE |
#define | I2S_FLAG_RXNE SPI_SR_RXNE |
#define | I2S_FLAG_UDR SPI_SR_UDR |
#define | I2S_FLAG_OVR SPI_SR_OVR |
#define | I2S_FLAG_FRE SPI_SR_FRE |
#define | I2S_FLAG_CHSIDE SPI_SR_CHSIDE |
#define | I2S_FLAG_BSY SPI_SR_BSY |
#define | I2S_FLAG_MASK |
#define | I2S_CLOCK_PLL (0x00000000U) |
#define | I2S_CLOCK_EXTERNAL (0x00000001U) |
#define | I2S_CLOCK_PLLR (0x00000002U) |
#define | I2S_CLOCK_PLLSRC (0x00000003U) |
#define | __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) |
Reset I2S handle state. | |
#define | __HAL_I2S_ENABLE(__HANDLE__) |
Enable the specified SPI peripheral (in I2S mode). | |
#define | __HAL_I2S_DISABLE(__HANDLE__) |
Disable the specified SPI peripheral (in I2S mode). | |
#define | __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__) |
Enable the specified I2S interrupts. | |
#define | __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) |
Disable the specified I2S interrupts. | |
#define | __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) |
Checks if the specified I2S interrupt source is enabled or disabled. | |
#define | __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) |
Checks whether the specified I2S flag is set or not. | |
#define | __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) |
Clears the I2S OVR pending flag. | |
#define | __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__) |
Clears the I2S UDR pending flag. | |
#define | __HAL_I2S_FLUSH_RX_DR(__HANDLE__) |
Flush the I2S DR Register. | |
#define | I2S_CHECK_FLAG(__SR__, __FLAG__) |
Check whether the specified SPI flag is set or not. | |
#define | I2S_CHECK_IT_SOURCE(__CR2__, __INTERRUPT__) |
Check whether the specified SPI Interrupt is set or not. | |
#define | IS_I2S_MODE(__MODE__) |
Checks if I2S Mode parameter is in allowed range. | |
#define | IS_I2S_STANDARD(__STANDARD__) |
#define | IS_I2S_DATA_FORMAT(__FORMAT__) |
#define | IS_I2S_MCLK_OUTPUT(__OUTPUT__) |
#define | IS_I2S_AUDIO_FREQ(__FREQ__) |
#define | IS_I2S_FULLDUPLEX_MODE(MODE) |
#define | IS_I2S_CPOL(__CPOL__) |
Checks if I2S Serial clock steady state parameter is in allowed range. | |
#define | IS_I2S_CLOCKSOURCE(CLOCK) |
Typedefs | |
typedef struct __I2S_HandleTypeDef | I2S_HandleTypeDef |
I2S handle Structure definition. | |
Enumerations | |
enum | HAL_I2S_StateTypeDef { HAL_I2S_STATE_RESET = 0x00U , HAL_I2S_STATE_READY = 0x01U , HAL_I2S_STATE_BUSY = 0x02U , HAL_I2S_STATE_BUSY_TX = 0x03U , HAL_I2S_STATE_BUSY_RX = 0x04U , HAL_I2S_STATE_BUSY_TX_RX = 0x05U , HAL_I2S_STATE_TIMEOUT = 0x06U , HAL_I2S_STATE_ERROR = 0x07U } |
HAL State structures definition. More... | |
Functions | |
HAL_StatusTypeDef | HAL_I2S_Init (I2S_HandleTypeDef *hi2s) |
Initializes the I2S according to the specified parameters in the I2S_InitTypeDef and create the associated handle. | |
HAL_StatusTypeDef | HAL_I2S_DeInit (I2S_HandleTypeDef *hi2s) |
DeInitializes the I2S peripheral. | |
void | HAL_I2S_MspInit (I2S_HandleTypeDef *hi2s) |
I2S MSP Init. | |
void | HAL_I2S_MspDeInit (I2S_HandleTypeDef *hi2s) |
I2S MSP DeInit. | |
HAL_StatusTypeDef | HAL_I2S_Transmit (I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout) |
Transmit an amount of data in blocking mode. | |
HAL_StatusTypeDef | HAL_I2S_Receive (I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout) |
Receive an amount of data in blocking mode. | |
HAL_StatusTypeDef | HAL_I2S_Transmit_IT (I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) |
Transmit an amount of data in non-blocking mode with Interrupt. | |
HAL_StatusTypeDef | HAL_I2S_Receive_IT (I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) |
Receive an amount of data in non-blocking mode with Interrupt. | |
void | HAL_I2S_IRQHandler (I2S_HandleTypeDef *hi2s) |
This function handles I2S interrupt request. | |
HAL_StatusTypeDef | HAL_I2S_Transmit_DMA (I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) |
Transmit an amount of data in non-blocking mode with DMA. | |
HAL_StatusTypeDef | HAL_I2S_Receive_DMA (I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) |
Receive an amount of data in non-blocking mode with DMA. | |
HAL_StatusTypeDef | HAL_I2S_DMAPause (I2S_HandleTypeDef *hi2s) |
Pauses the audio DMA Stream/Channel playing from the Media. | |
HAL_StatusTypeDef | HAL_I2S_DMAResume (I2S_HandleTypeDef *hi2s) |
Resumes the audio DMA Stream/Channel playing from the Media. | |
HAL_StatusTypeDef | HAL_I2S_DMAStop (I2S_HandleTypeDef *hi2s) |
Stops the audio DMA Stream/Channel playing from the Media. | |
void | HAL_I2S_TxHalfCpltCallback (I2S_HandleTypeDef *hi2s) |
Tx Transfer Half completed callbacks. | |
void | HAL_I2S_TxCpltCallback (I2S_HandleTypeDef *hi2s) |
Tx Transfer completed callbacks. | |
void | HAL_I2S_RxHalfCpltCallback (I2S_HandleTypeDef *hi2s) |
Rx Transfer half completed callbacks. | |
void | HAL_I2S_RxCpltCallback (I2S_HandleTypeDef *hi2s) |
Rx Transfer completed callbacks. | |
void | HAL_I2S_ErrorCallback (I2S_HandleTypeDef *hi2s) |
I2S error callbacks. | |
HAL_I2S_StateTypeDef | HAL_I2S_GetState (I2S_HandleTypeDef *hi2s) |
Return the I2S state. | |
uint32_t | HAL_I2S_GetError (I2S_HandleTypeDef *hi2s) |
Return the I2S error code. | |
Header file of I2S HAL module.
Copyright (c) 2016 STMicroelectronics. All rights reserved.
This software is licensed under terms that can be found in the LICENSE file in the root directory of this software component. If no LICENSE file comes with this software, it is provided AS-IS.
Definition in file stm32f4xx_hal_i2s.h.