Header file of PWR HAL Extension module. More...

#include "stm32f4xx_hal_def.h"

Include dependency graph for stm32f4xx_hal_pwr_ex.h:

Macros
#define	PWR_MAINREGULATOR_UNDERDRIVE_ON PWR_CR_MRUDS

#define	PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON ((uint32_t)(PWR_CR_LPDS \| PWR_CR_LPUDS))

#define	PWR_FLAG_ODRDY PWR_CSR_ODRDY

#define	PWR_FLAG_ODSWRDY PWR_CSR_ODSWRDY

#define	PWR_FLAG_UDRDY PWR_CSR_UDSWRDY

#define	PWR_REGULATOR_VOLTAGE_SCALE1

#define	PWR_REGULATOR_VOLTAGE_SCALE2

#define	PWR_REGULATOR_VOLTAGE_SCALE3 PWR_CR_VOS_0 /* Scale 3 mode: the maximum value of fHCLK is 120 MHz. */

#define	PWR_WAKEUP_PIN2 0x00000080U

#define	__HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__)
	macros configure the main internal regulator output voltage.

#define	__HAL_PWR_OVERDRIVE_ENABLE()
	Macros to enable or disable the Over drive mode.

#define	__HAL_PWR_OVERDRIVE_DISABLE()

#define	__HAL_PWR_OVERDRIVESWITCHING_ENABLE()
	Macros to enable or disable the Over drive switching.

#define	__HAL_PWR_OVERDRIVESWITCHING_DISABLE()

#define	__HAL_PWR_UNDERDRIVE_ENABLE()
	Macros to enable or disable the Under drive mode.

#define	__HAL_PWR_UNDERDRIVE_DISABLE()

#define	__HAL_PWR_GET_ODRUDR_FLAG(__FLAG__)
	Check PWR flag is set or not.

#define	__HAL_PWR_CLEAR_ODRUDR_FLAG()
	Clear the Under-Drive Ready flag.

#define	FPDS_BIT_NUMBER PWR_CR_FPDS_Pos

#define	CR_FPDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (FPDS_BIT_NUMBER * 4U))

#define	ODEN_BIT_NUMBER PWR_CR_ODEN_Pos

#define	CR_ODEN_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (ODEN_BIT_NUMBER * 4U))

#define	ODSWEN_BIT_NUMBER PWR_CR_ODSWEN_Pos

#define	CR_ODSWEN_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (ODSWEN_BIT_NUMBER * 4U))

#define	MRLVDS_BIT_NUMBER PWR_CR_MRLVDS_Pos

#define	CR_MRLVDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (MRLVDS_BIT_NUMBER * 4U))

#define	LPLVDS_BIT_NUMBER PWR_CR_LPLVDS_Pos

#define	CR_LPLVDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (LPLVDS_BIT_NUMBER * 4U))

#define	BRE_BIT_NUMBER PWR_CSR_BRE_Pos

#define	CSR_BRE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (BRE_BIT_NUMBER * 4U))

#define	IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR)

#define	IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE)

#define	IS_PWR_WAKEUP_PIN(PIN)

Functions
void	HAL_PWREx_EnableFlashPowerDown (void)
	Enables the Flash Power Down in Stop mode.

void	HAL_PWREx_DisableFlashPowerDown (void)
	Disables the Flash Power Down in Stop mode.

HAL_StatusTypeDef	HAL_PWREx_EnableBkUpReg (void)
	Enables the Backup Regulator.

HAL_StatusTypeDef	HAL_PWREx_DisableBkUpReg (void)
	Disables the Backup Regulator.

uint32_t	HAL_PWREx_GetVoltageRange (void)
	Return Voltage Scaling Range.

HAL_StatusTypeDef	HAL_PWREx_ControlVoltageScaling (uint32_t VoltageScaling)
	Configures the main internal regulator output voltage.

HAL_StatusTypeDef	HAL_PWREx_EnableOverDrive (void)
	Activates the Over-Drive mode.

HAL_StatusTypeDef	HAL_PWREx_DisableOverDrive (void)
	Deactivates the Over-Drive mode.

HAL_StatusTypeDef	HAL_PWREx_EnterUnderDriveSTOPMode (uint32_t Regulator, uint8_t STOPEntry)
	Enters in Under-Drive STOP mode.

Detailed Description

Header file of PWR HAL Extension module.

Author: MCD Application Team

Attention

This software is licensed under terms that can be found in the LICENSE file in the root directory of this software component. If no LICENSE file comes with this software, it is provided AS-IS.

Definition in file stm32f4xx_hal_pwr_ex.h.

Macros

Functions

Detailed Description