STM32F4xx HAL Documentation
Hardware Abstraction Layer for STM32F4 familiy
Loading...
Searching...
No Matches
Macros
stm32f4xx_hal_conf_template.h File Reference

HAL configuration template file. This file should be copied to the application folder and renamed to stm32f4xx_hal_conf.h. More...

#include "stm32f4xx_hal_rcc.h"
#include "stm32f4xx_hal_gpio.h"
#include "stm32f4xx_hal_exti.h"
#include "stm32f4xx_hal_dma.h"
#include "stm32f4xx_hal_cortex.h"
#include "stm32f4xx_hal_adc.h"
#include "stm32f4xx_hal_can.h"
#include "stm32f4xx_hal_can_legacy.h"
#include "stm32f4xx_hal_crc.h"
#include "stm32f4xx_hal_cryp.h"
#include "stm32f4xx_hal_dma2d.h"
#include "stm32f4xx_hal_dac.h"
#include "stm32f4xx_hal_dcmi.h"
#include "stm32f4xx_hal_eth.h"
#include "stm32f4xx_hal_eth_legacy.h"
#include "stm32f4xx_hal_flash.h"
#include "stm32f4xx_hal_sram.h"
#include "stm32f4xx_hal_nor.h"
#include "stm32f4xx_hal_nand.h"
#include "stm32f4xx_hal_pccard.h"
#include "stm32f4xx_hal_sdram.h"
#include "stm32f4xx_hal_hash.h"
#include "stm32f4xx_hal_i2c.h"
#include "stm32f4xx_hal_smbus.h"
#include "stm32f4xx_hal_i2s.h"
#include "stm32f4xx_hal_iwdg.h"
#include "stm32f4xx_hal_ltdc.h"
#include "stm32f4xx_hal_pwr.h"
#include "stm32f4xx_hal_rng.h"
#include "stm32f4xx_hal_rtc.h"
#include "stm32f4xx_hal_sai.h"
#include "stm32f4xx_hal_sd.h"
#include "stm32f4xx_hal_spi.h"
#include "stm32f4xx_hal_tim.h"
#include "stm32f4xx_hal_uart.h"
#include "stm32f4xx_hal_usart.h"
#include "stm32f4xx_hal_irda.h"
#include "stm32f4xx_hal_smartcard.h"
#include "stm32f4xx_hal_wwdg.h"
#include "stm32f4xx_hal_pcd.h"
#include "stm32f4xx_hal_hcd.h"
#include "stm32f4xx_hal_dsi.h"
#include "stm32f4xx_hal_qspi.h"
#include "stm32f4xx_hal_cec.h"
#include "stm32f4xx_hal_fmpi2c.h"
#include "stm32f4xx_hal_fmpsmbus.h"
#include "stm32f4xx_hal_spdifrx.h"
#include "stm32f4xx_hal_dfsdm.h"
#include "stm32f4xx_hal_lptim.h"
#include "stm32f4xx_hal_mmc.h"

Go to the source code of this file.

Macros

#define HAL_MODULE_ENABLED
 This is the list of modules to be used in the HAL driver.
 
#define HAL_ADC_MODULE_ENABLED
 
#define HAL_CAN_MODULE_ENABLED
 
#define HAL_CRC_MODULE_ENABLED
 
#define HAL_CEC_MODULE_ENABLED
 
#define HAL_CRYP_MODULE_ENABLED
 
#define HAL_DAC_MODULE_ENABLED
 
#define HAL_DCMI_MODULE_ENABLED
 
#define HAL_DMA_MODULE_ENABLED
 
#define HAL_DMA2D_MODULE_ENABLED
 
#define HAL_ETH_MODULE_ENABLED
 
#define HAL_FLASH_MODULE_ENABLED
 
#define HAL_NAND_MODULE_ENABLED
 
#define HAL_NOR_MODULE_ENABLED
 
#define HAL_PCCARD_MODULE_ENABLED
 
#define HAL_SRAM_MODULE_ENABLED
 
#define HAL_SDRAM_MODULE_ENABLED
 
#define HAL_HASH_MODULE_ENABLED
 
#define HAL_GPIO_MODULE_ENABLED
 
#define HAL_EXTI_MODULE_ENABLED
 
#define HAL_I2C_MODULE_ENABLED
 
#define HAL_SMBUS_MODULE_ENABLED
 
#define HAL_I2S_MODULE_ENABLED
 
#define HAL_IWDG_MODULE_ENABLED
 
#define HAL_LTDC_MODULE_ENABLED
 
#define HAL_DSI_MODULE_ENABLED
 
#define HAL_PWR_MODULE_ENABLED
 
#define HAL_QSPI_MODULE_ENABLED
 
#define HAL_RCC_MODULE_ENABLED
 
#define HAL_RNG_MODULE_ENABLED
 
#define HAL_RTC_MODULE_ENABLED
 
#define HAL_SAI_MODULE_ENABLED
 
#define HAL_SD_MODULE_ENABLED
 
#define HAL_SPI_MODULE_ENABLED
 
#define HAL_TIM_MODULE_ENABLED
 
#define HAL_UART_MODULE_ENABLED
 
#define HAL_USART_MODULE_ENABLED
 
#define HAL_IRDA_MODULE_ENABLED
 
#define HAL_SMARTCARD_MODULE_ENABLED
 
#define HAL_WWDG_MODULE_ENABLED
 
#define HAL_CORTEX_MODULE_ENABLED
 
#define HAL_PCD_MODULE_ENABLED
 
#define HAL_HCD_MODULE_ENABLED
 
#define HAL_FMPI2C_MODULE_ENABLED
 
#define HAL_FMPSMBUS_MODULE_ENABLED
 
#define HAL_SPDIFRX_MODULE_ENABLED
 
#define HAL_DFSDM_MODULE_ENABLED
 
#define HAL_LPTIM_MODULE_ENABLED
 
#define HAL_MMC_MODULE_ENABLED
 
#define HSE_VALUE   25000000U
 Adjust the value of External High Speed oscillator (HSE) used in your application. This value is used by the RCC HAL module to compute the system frequency (when HSE is used as system clock source, directly or through the PLL).

 
#define HSE_STARTUP_TIMEOUT   100U
 
#define HSI_VALUE   16000000U
 Internal High Speed oscillator (HSI) value. This value is used by the RCC HAL module to compute the system frequency (when HSI is used as system clock source, directly or through the PLL).
 
#define LSI_VALUE   32000U
 Internal Low Speed oscillator (LSI) value.
 
#define LSE_VALUE   32768U
 External Low Speed oscillator (LSE) value.
 
#define LSE_STARTUP_TIMEOUT   5000U
 
#define EXTERNAL_CLOCK_VALUE   12288000U
 External clock source for I2S peripheral This value is used by the I2S HAL module to compute the I2S clock source frequency, this source is inserted directly through I2S_CKIN pad.
 
#define VDD_VALUE   3300U
 This is the HAL system configuration section.
 
#define TICK_INT_PRIORITY   0x0FU
 
#define USE_RTOS   0U
 
#define PREFETCH_ENABLE   1U
 
#define INSTRUCTION_CACHE_ENABLE   1U
 
#define DATA_CACHE_ENABLE   1U
 
#define USE_HAL_ADC_REGISTER_CALLBACKS   0U /* ADC register callback disabled */
 
#define USE_HAL_CAN_REGISTER_CALLBACKS   0U /* CAN register callback disabled */
 
#define USE_HAL_CEC_REGISTER_CALLBACKS   0U /* CEC register callback disabled */
 
#define USE_HAL_CRYP_REGISTER_CALLBACKS   0U /* CRYP register callback disabled */
 
#define USE_HAL_DAC_REGISTER_CALLBACKS   0U /* DAC register callback disabled */
 
#define USE_HAL_DCMI_REGISTER_CALLBACKS   0U /* DCMI register callback disabled */
 
#define USE_HAL_DFSDM_REGISTER_CALLBACKS   0U /* DFSDM register callback disabled */
 
#define USE_HAL_DMA2D_REGISTER_CALLBACKS   0U /* DMA2D register callback disabled */
 
#define USE_HAL_DSI_REGISTER_CALLBACKS   0U /* DSI register callback disabled */
 
#define USE_HAL_ETH_REGISTER_CALLBACKS   0U /* ETH register callback disabled */
 
#define USE_HAL_HASH_REGISTER_CALLBACKS   0U /* HASH register callback disabled */
 
#define USE_HAL_HCD_REGISTER_CALLBACKS   0U /* HCD register callback disabled */
 
#define USE_HAL_I2C_REGISTER_CALLBACKS   0U /* I2C register callback disabled */
 
#define USE_HAL_FMPI2C_REGISTER_CALLBACKS   0U /* FMPI2C register callback disabled */
 
#define USE_HAL_FMPSMBUS_REGISTER_CALLBACKS   0U /* FMPSMBUS register callback disabled */
 
#define USE_HAL_I2S_REGISTER_CALLBACKS   0U /* I2S register callback disabled */
 
#define USE_HAL_IRDA_REGISTER_CALLBACKS   0U /* IRDA register callback disabled */
 
#define USE_HAL_LPTIM_REGISTER_CALLBACKS   0U /* LPTIM register callback disabled */
 
#define USE_HAL_LTDC_REGISTER_CALLBACKS   0U /* LTDC register callback disabled */
 
#define USE_HAL_MMC_REGISTER_CALLBACKS   0U /* MMC register callback disabled */
 
#define USE_HAL_NAND_REGISTER_CALLBACKS   0U /* NAND register callback disabled */
 
#define USE_HAL_NOR_REGISTER_CALLBACKS   0U /* NOR register callback disabled */
 
#define USE_HAL_PCCARD_REGISTER_CALLBACKS   0U /* PCCARD register callback disabled */
 
#define USE_HAL_PCD_REGISTER_CALLBACKS   0U /* PCD register callback disabled */
 
#define USE_HAL_QSPI_REGISTER_CALLBACKS   0U /* QSPI register callback disabled */
 
#define USE_HAL_RNG_REGISTER_CALLBACKS   0U /* RNG register callback disabled */
 
#define USE_HAL_RTC_REGISTER_CALLBACKS   0U /* RTC register callback disabled */
 
#define USE_HAL_SAI_REGISTER_CALLBACKS   0U /* SAI register callback disabled */
 
#define USE_HAL_SD_REGISTER_CALLBACKS   0U /* SD register callback disabled */
 
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
 
#define USE_HAL_SDRAM_REGISTER_CALLBACKS   0U /* SDRAM register callback disabled */
 
#define USE_HAL_SRAM_REGISTER_CALLBACKS   0U /* SRAM register callback disabled */
 
#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS   0U /* SPDIFRX register callback disabled */
 
#define USE_HAL_SMBUS_REGISTER_CALLBACKS   0U /* SMBUS register callback disabled */
 
#define USE_HAL_SPI_REGISTER_CALLBACKS   0U /* SPI register callback disabled */
 
#define USE_HAL_TIM_REGISTER_CALLBACKS   0U /* TIM register callback disabled */
 
#define USE_HAL_UART_REGISTER_CALLBACKS   0U /* UART register callback disabled */
 
#define USE_HAL_USART_REGISTER_CALLBACKS   0U /* USART register callback disabled */
 
#define USE_HAL_WWDG_REGISTER_CALLBACKS   0U /* WWDG register callback disabled */
 
#define MAC_ADDR0   2U
 Uncomment the line below to expanse the "assert_param" macro in the HAL drivers code.
 
#define MAC_ADDR1   0U
 
#define MAC_ADDR2   0U
 
#define MAC_ADDR3   0U
 
#define MAC_ADDR4   0U
 
#define MAC_ADDR5   0U
 
#define ETH_RX_BUF_SIZE   1528U /* ETH Max buffer size for receive */
 
#define ETH_TX_BUF_SIZE   1528U /* ETH Max buffer size for transmit */
 
#define ETH_RXBUFNB   4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
 
#define ETH_TXBUFNB   4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
 
#define DP83848_PHY_ADDRESS   0x01U
 
#define PHY_RESET_DELAY   0x000000FFU
 
#define PHY_CONFIG_DELAY   0x00000FFFU
 
#define PHY_READ_TO   0x0000FFFFU
 
#define PHY_WRITE_TO   0x0000FFFFU
 
#define PHY_BCR   ((uint16_t)0x0000)
 
#define PHY_BSR   ((uint16_t)0x0001)
 
#define PHY_RESET   ((uint16_t)0x8000)
 
#define PHY_LOOPBACK   ((uint16_t)0x4000)
 
#define PHY_FULLDUPLEX_100M   ((uint16_t)0x2100)
 
#define PHY_HALFDUPLEX_100M   ((uint16_t)0x2000)
 
#define PHY_FULLDUPLEX_10M   ((uint16_t)0x0100)
 
#define PHY_HALFDUPLEX_10M   ((uint16_t)0x0000)
 
#define PHY_AUTONEGOTIATION   ((uint16_t)0x1000)
 
#define PHY_RESTART_AUTONEGOTIATION   ((uint16_t)0x0200)
 
#define PHY_POWERDOWN   ((uint16_t)0x0800)
 
#define PHY_ISOLATE   ((uint16_t)0x0400)
 
#define PHY_AUTONEGO_COMPLETE   ((uint16_t)0x0020)
 
#define PHY_LINKED_STATUS   ((uint16_t)0x0004)
 
#define PHY_JABBER_DETECTION   ((uint16_t)0x0002)
 
#define PHY_SR   ((uint16_t)0x0010)
 
#define PHY_MICR   ((uint16_t)0x0011)
 
#define PHY_MISR   ((uint16_t)0x0012)
 
#define PHY_LINK_STATUS   ((uint16_t)0x0001)
 
#define PHY_SPEED_STATUS   ((uint16_t)0x0002)
 
#define PHY_DUPLEX_STATUS   ((uint16_t)0x0004)
 
#define PHY_MICR_INT_EN   ((uint16_t)0x0002)
 
#define PHY_MICR_INT_OE   ((uint16_t)0x0001)
 
#define PHY_MISR_LINK_INT_EN   ((uint16_t)0x0020)
 
#define PHY_LINK_INTERRUPT   ((uint16_t)0x2000)
 
#define USE_SPI_CRC   1U
 
#define assert_param(expr)
 Include module's header file.
 

Detailed Description

HAL configuration template file. This file should be copied to the application folder and renamed to stm32f4xx_hal_conf.h.

Author
MCD Application Team
Attention

Copyright (c) 2017 STMicroelectronics. All rights reserved.

This software is licensed under terms that can be found in the LICENSE file in the root directory of this software component. If no LICENSE file comes with this software, it is provided AS-IS.

Author
MCD Application Team
Attention

Copyright (c) 2017 STMicroelectronics. All rights reserved.

This software is licensed under terms that can be found in the LICENSE file in the root directory of this software component. If no LICENSE file comes with this software, it is provided AS-IS.

Definition in file stm32f4xx_hal_conf_template.h.

Macro Definition Documentation

◆ HAL_MODULE_ENABLED

#define HAL_MODULE_ENABLED

This is the list of modules to be used in the HAL driver.

Definition at line 36 of file stm32f4xx_hal_conf_template.h.

◆ HAL_ADC_MODULE_ENABLED

#define HAL_ADC_MODULE_ENABLED

Definition at line 37 of file stm32f4xx_hal_conf_template.h.

◆ HAL_CAN_MODULE_ENABLED

#define HAL_CAN_MODULE_ENABLED

Definition at line 38 of file stm32f4xx_hal_conf_template.h.

◆ HAL_CRC_MODULE_ENABLED

#define HAL_CRC_MODULE_ENABLED

Definition at line 40 of file stm32f4xx_hal_conf_template.h.

◆ HAL_CEC_MODULE_ENABLED

#define HAL_CEC_MODULE_ENABLED

Definition at line 41 of file stm32f4xx_hal_conf_template.h.

◆ HAL_CRYP_MODULE_ENABLED

#define HAL_CRYP_MODULE_ENABLED

Definition at line 42 of file stm32f4xx_hal_conf_template.h.

◆ HAL_DAC_MODULE_ENABLED

#define HAL_DAC_MODULE_ENABLED

Definition at line 43 of file stm32f4xx_hal_conf_template.h.

◆ HAL_DCMI_MODULE_ENABLED

#define HAL_DCMI_MODULE_ENABLED

Definition at line 44 of file stm32f4xx_hal_conf_template.h.

◆ HAL_DMA_MODULE_ENABLED

#define HAL_DMA_MODULE_ENABLED

Definition at line 45 of file stm32f4xx_hal_conf_template.h.

◆ HAL_DMA2D_MODULE_ENABLED

#define HAL_DMA2D_MODULE_ENABLED

Definition at line 46 of file stm32f4xx_hal_conf_template.h.

◆ HAL_ETH_MODULE_ENABLED

#define HAL_ETH_MODULE_ENABLED

Definition at line 47 of file stm32f4xx_hal_conf_template.h.

◆ HAL_FLASH_MODULE_ENABLED

#define HAL_FLASH_MODULE_ENABLED

Definition at line 49 of file stm32f4xx_hal_conf_template.h.

◆ HAL_NAND_MODULE_ENABLED

#define HAL_NAND_MODULE_ENABLED

Definition at line 50 of file stm32f4xx_hal_conf_template.h.

◆ HAL_NOR_MODULE_ENABLED

#define HAL_NOR_MODULE_ENABLED

Definition at line 51 of file stm32f4xx_hal_conf_template.h.

◆ HAL_PCCARD_MODULE_ENABLED

#define HAL_PCCARD_MODULE_ENABLED

Definition at line 52 of file stm32f4xx_hal_conf_template.h.

◆ HAL_SRAM_MODULE_ENABLED

#define HAL_SRAM_MODULE_ENABLED

Definition at line 53 of file stm32f4xx_hal_conf_template.h.

◆ HAL_SDRAM_MODULE_ENABLED

#define HAL_SDRAM_MODULE_ENABLED

Definition at line 54 of file stm32f4xx_hal_conf_template.h.

◆ HAL_HASH_MODULE_ENABLED

#define HAL_HASH_MODULE_ENABLED

Definition at line 55 of file stm32f4xx_hal_conf_template.h.

◆ HAL_GPIO_MODULE_ENABLED

#define HAL_GPIO_MODULE_ENABLED

Definition at line 56 of file stm32f4xx_hal_conf_template.h.

◆ HAL_EXTI_MODULE_ENABLED

#define HAL_EXTI_MODULE_ENABLED

Definition at line 57 of file stm32f4xx_hal_conf_template.h.

◆ HAL_I2C_MODULE_ENABLED

#define HAL_I2C_MODULE_ENABLED

Definition at line 58 of file stm32f4xx_hal_conf_template.h.

◆ HAL_SMBUS_MODULE_ENABLED

#define HAL_SMBUS_MODULE_ENABLED

Definition at line 59 of file stm32f4xx_hal_conf_template.h.

◆ HAL_I2S_MODULE_ENABLED

#define HAL_I2S_MODULE_ENABLED

Definition at line 60 of file stm32f4xx_hal_conf_template.h.

◆ HAL_IWDG_MODULE_ENABLED

#define HAL_IWDG_MODULE_ENABLED

Definition at line 61 of file stm32f4xx_hal_conf_template.h.

◆ HAL_LTDC_MODULE_ENABLED

#define HAL_LTDC_MODULE_ENABLED

Definition at line 62 of file stm32f4xx_hal_conf_template.h.

◆ HAL_DSI_MODULE_ENABLED

#define HAL_DSI_MODULE_ENABLED

Definition at line 63 of file stm32f4xx_hal_conf_template.h.

◆ HAL_PWR_MODULE_ENABLED

#define HAL_PWR_MODULE_ENABLED

Definition at line 64 of file stm32f4xx_hal_conf_template.h.

◆ HAL_QSPI_MODULE_ENABLED

#define HAL_QSPI_MODULE_ENABLED

Definition at line 65 of file stm32f4xx_hal_conf_template.h.

◆ HAL_RCC_MODULE_ENABLED

#define HAL_RCC_MODULE_ENABLED

Definition at line 66 of file stm32f4xx_hal_conf_template.h.

◆ HAL_RNG_MODULE_ENABLED

#define HAL_RNG_MODULE_ENABLED

Definition at line 67 of file stm32f4xx_hal_conf_template.h.

◆ HAL_RTC_MODULE_ENABLED

#define HAL_RTC_MODULE_ENABLED

Definition at line 68 of file stm32f4xx_hal_conf_template.h.

◆ HAL_SAI_MODULE_ENABLED

#define HAL_SAI_MODULE_ENABLED

Definition at line 69 of file stm32f4xx_hal_conf_template.h.

◆ HAL_SD_MODULE_ENABLED

#define HAL_SD_MODULE_ENABLED

Definition at line 70 of file stm32f4xx_hal_conf_template.h.

◆ HAL_SPI_MODULE_ENABLED

#define HAL_SPI_MODULE_ENABLED

Definition at line 71 of file stm32f4xx_hal_conf_template.h.

◆ HAL_TIM_MODULE_ENABLED

#define HAL_TIM_MODULE_ENABLED

Definition at line 72 of file stm32f4xx_hal_conf_template.h.

◆ HAL_UART_MODULE_ENABLED

#define HAL_UART_MODULE_ENABLED

Definition at line 73 of file stm32f4xx_hal_conf_template.h.

◆ HAL_USART_MODULE_ENABLED

#define HAL_USART_MODULE_ENABLED

Definition at line 74 of file stm32f4xx_hal_conf_template.h.

◆ HAL_IRDA_MODULE_ENABLED

#define HAL_IRDA_MODULE_ENABLED

Definition at line 75 of file stm32f4xx_hal_conf_template.h.

◆ HAL_SMARTCARD_MODULE_ENABLED

#define HAL_SMARTCARD_MODULE_ENABLED

Definition at line 76 of file stm32f4xx_hal_conf_template.h.

◆ HAL_WWDG_MODULE_ENABLED

#define HAL_WWDG_MODULE_ENABLED

Definition at line 77 of file stm32f4xx_hal_conf_template.h.

◆ HAL_CORTEX_MODULE_ENABLED

#define HAL_CORTEX_MODULE_ENABLED

Definition at line 78 of file stm32f4xx_hal_conf_template.h.

◆ HAL_PCD_MODULE_ENABLED

#define HAL_PCD_MODULE_ENABLED

Definition at line 79 of file stm32f4xx_hal_conf_template.h.

◆ HAL_HCD_MODULE_ENABLED

#define HAL_HCD_MODULE_ENABLED

Definition at line 80 of file stm32f4xx_hal_conf_template.h.

◆ HAL_FMPI2C_MODULE_ENABLED

#define HAL_FMPI2C_MODULE_ENABLED

Definition at line 81 of file stm32f4xx_hal_conf_template.h.

◆ HAL_FMPSMBUS_MODULE_ENABLED

#define HAL_FMPSMBUS_MODULE_ENABLED

Definition at line 82 of file stm32f4xx_hal_conf_template.h.

◆ HAL_SPDIFRX_MODULE_ENABLED

#define HAL_SPDIFRX_MODULE_ENABLED

Definition at line 83 of file stm32f4xx_hal_conf_template.h.

◆ HAL_DFSDM_MODULE_ENABLED

#define HAL_DFSDM_MODULE_ENABLED

Definition at line 84 of file stm32f4xx_hal_conf_template.h.

◆ HAL_LPTIM_MODULE_ENABLED

#define HAL_LPTIM_MODULE_ENABLED

Definition at line 85 of file stm32f4xx_hal_conf_template.h.

◆ HAL_MMC_MODULE_ENABLED

#define HAL_MMC_MODULE_ENABLED

Definition at line 86 of file stm32f4xx_hal_conf_template.h.

◆ HSE_VALUE

#define HSE_VALUE   25000000U

Adjust the value of External High Speed oscillator (HSE) used in your application. This value is used by the RCC HAL module to compute the system frequency (when HSE is used as system clock source, directly or through the PLL).

Value of the External oscillator in Hz

Definition at line 95 of file stm32f4xx_hal_conf_template.h.

Referenced by HAL_DSI_Init(), HAL_RCC_GetSysClockFreq(), HAL_RCCEx_GetPeriphCLKFreq(), and SAI_GetInputClock().

◆ HSE_STARTUP_TIMEOUT

#define HSE_STARTUP_TIMEOUT   100U

Time out for HSE start up, in ms

Definition at line 99 of file stm32f4xx_hal_conf_template.h.

◆ HSI_VALUE

#define HSI_VALUE   16000000U

Internal High Speed oscillator (HSI) value. This value is used by the RCC HAL module to compute the system frequency (when HSI is used as system clock source, directly or through the PLL).

Value of the Internal oscillator in Hz

Definition at line 108 of file stm32f4xx_hal_conf_template.h.

Referenced by HAL_RCC_DeInit(), HAL_RCC_GetSysClockFreq(), HAL_RCCEx_GetPeriphCLKFreq(), and SAI_GetInputClock().

◆ LSI_VALUE

#define LSI_VALUE   32000U

Internal Low Speed oscillator (LSI) value.

LSI Typical Value in Hz

Definition at line 115 of file stm32f4xx_hal_conf_template.h.

◆ LSE_VALUE

#define LSE_VALUE   32768U

External Low Speed oscillator (LSE) value.

< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. Value of the External Low Speed oscillator in Hz

Definition at line 123 of file stm32f4xx_hal_conf_template.h.

◆ LSE_STARTUP_TIMEOUT

#define LSE_STARTUP_TIMEOUT   5000U

Time out for LSE start up, in ms

Definition at line 127 of file stm32f4xx_hal_conf_template.h.

◆ EXTERNAL_CLOCK_VALUE

#define EXTERNAL_CLOCK_VALUE   12288000U

External clock source for I2S peripheral This value is used by the I2S HAL module to compute the I2S clock source frequency, this source is inserted directly through I2S_CKIN pad.

Value of the External oscillator in Hz

Definition at line 136 of file stm32f4xx_hal_conf_template.h.

Referenced by HAL_RCCEx_GetPeriphCLKFreq(), and SAI_GetInputClock().

◆ VDD_VALUE

#define VDD_VALUE   3300U

This is the HAL system configuration section.

Value of VDD in mv

Definition at line 146 of file stm32f4xx_hal_conf_template.h.

◆ TICK_INT_PRIORITY

#define TICK_INT_PRIORITY   0x0FU

tick interrupt priority

Definition at line 147 of file stm32f4xx_hal_conf_template.h.

Referenced by HAL_Init().

◆ USE_RTOS

#define USE_RTOS   0U

Definition at line 148 of file stm32f4xx_hal_conf_template.h.

◆ PREFETCH_ENABLE

#define PREFETCH_ENABLE   1U

Definition at line 149 of file stm32f4xx_hal_conf_template.h.

◆ INSTRUCTION_CACHE_ENABLE

#define INSTRUCTION_CACHE_ENABLE   1U

Definition at line 150 of file stm32f4xx_hal_conf_template.h.

◆ DATA_CACHE_ENABLE

#define DATA_CACHE_ENABLE   1U

Definition at line 151 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_ADC_REGISTER_CALLBACKS

#define USE_HAL_ADC_REGISTER_CALLBACKS   0U /* ADC register callback disabled */

Definition at line 153 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_CAN_REGISTER_CALLBACKS

#define USE_HAL_CAN_REGISTER_CALLBACKS   0U /* CAN register callback disabled */

Definition at line 154 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_CEC_REGISTER_CALLBACKS

#define USE_HAL_CEC_REGISTER_CALLBACKS   0U /* CEC register callback disabled */

Definition at line 155 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_CRYP_REGISTER_CALLBACKS

#define USE_HAL_CRYP_REGISTER_CALLBACKS   0U /* CRYP register callback disabled */

Definition at line 156 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_DAC_REGISTER_CALLBACKS

#define USE_HAL_DAC_REGISTER_CALLBACKS   0U /* DAC register callback disabled */

Definition at line 157 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_DCMI_REGISTER_CALLBACKS

#define USE_HAL_DCMI_REGISTER_CALLBACKS   0U /* DCMI register callback disabled */

Definition at line 158 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_DFSDM_REGISTER_CALLBACKS

#define USE_HAL_DFSDM_REGISTER_CALLBACKS   0U /* DFSDM register callback disabled */

Definition at line 159 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_DMA2D_REGISTER_CALLBACKS

#define USE_HAL_DMA2D_REGISTER_CALLBACKS   0U /* DMA2D register callback disabled */

Definition at line 160 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_DSI_REGISTER_CALLBACKS

#define USE_HAL_DSI_REGISTER_CALLBACKS   0U /* DSI register callback disabled */

Definition at line 161 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_ETH_REGISTER_CALLBACKS

#define USE_HAL_ETH_REGISTER_CALLBACKS   0U /* ETH register callback disabled */

Definition at line 162 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_HASH_REGISTER_CALLBACKS

#define USE_HAL_HASH_REGISTER_CALLBACKS   0U /* HASH register callback disabled */

Definition at line 163 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_HCD_REGISTER_CALLBACKS

#define USE_HAL_HCD_REGISTER_CALLBACKS   0U /* HCD register callback disabled */

Definition at line 164 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_I2C_REGISTER_CALLBACKS

#define USE_HAL_I2C_REGISTER_CALLBACKS   0U /* I2C register callback disabled */

Definition at line 165 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_FMPI2C_REGISTER_CALLBACKS

#define USE_HAL_FMPI2C_REGISTER_CALLBACKS   0U /* FMPI2C register callback disabled */

Definition at line 166 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_FMPSMBUS_REGISTER_CALLBACKS

#define USE_HAL_FMPSMBUS_REGISTER_CALLBACKS   0U /* FMPSMBUS register callback disabled */

Definition at line 167 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_I2S_REGISTER_CALLBACKS

#define USE_HAL_I2S_REGISTER_CALLBACKS   0U /* I2S register callback disabled */

Definition at line 168 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_IRDA_REGISTER_CALLBACKS

#define USE_HAL_IRDA_REGISTER_CALLBACKS   0U /* IRDA register callback disabled */

Definition at line 169 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_LPTIM_REGISTER_CALLBACKS

#define USE_HAL_LPTIM_REGISTER_CALLBACKS   0U /* LPTIM register callback disabled */

Definition at line 170 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_LTDC_REGISTER_CALLBACKS

#define USE_HAL_LTDC_REGISTER_CALLBACKS   0U /* LTDC register callback disabled */

Definition at line 171 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_MMC_REGISTER_CALLBACKS

#define USE_HAL_MMC_REGISTER_CALLBACKS   0U /* MMC register callback disabled */

Definition at line 172 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_NAND_REGISTER_CALLBACKS

#define USE_HAL_NAND_REGISTER_CALLBACKS   0U /* NAND register callback disabled */

Definition at line 173 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_NOR_REGISTER_CALLBACKS

#define USE_HAL_NOR_REGISTER_CALLBACKS   0U /* NOR register callback disabled */

Definition at line 174 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_PCCARD_REGISTER_CALLBACKS

#define USE_HAL_PCCARD_REGISTER_CALLBACKS   0U /* PCCARD register callback disabled */

Definition at line 175 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_PCD_REGISTER_CALLBACKS

#define USE_HAL_PCD_REGISTER_CALLBACKS   0U /* PCD register callback disabled */

Definition at line 176 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_QSPI_REGISTER_CALLBACKS

#define USE_HAL_QSPI_REGISTER_CALLBACKS   0U /* QSPI register callback disabled */

Definition at line 177 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_RNG_REGISTER_CALLBACKS

#define USE_HAL_RNG_REGISTER_CALLBACKS   0U /* RNG register callback disabled */

Definition at line 178 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_RTC_REGISTER_CALLBACKS

#define USE_HAL_RTC_REGISTER_CALLBACKS   0U /* RTC register callback disabled */

Definition at line 179 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_SAI_REGISTER_CALLBACKS

#define USE_HAL_SAI_REGISTER_CALLBACKS   0U /* SAI register callback disabled */

Definition at line 180 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_SD_REGISTER_CALLBACKS

#define USE_HAL_SD_REGISTER_CALLBACKS   0U /* SD register callback disabled */

Definition at line 181 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_SMARTCARD_REGISTER_CALLBACKS

#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */

Definition at line 182 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_SDRAM_REGISTER_CALLBACKS

#define USE_HAL_SDRAM_REGISTER_CALLBACKS   0U /* SDRAM register callback disabled */

Definition at line 183 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_SRAM_REGISTER_CALLBACKS

#define USE_HAL_SRAM_REGISTER_CALLBACKS   0U /* SRAM register callback disabled */

Definition at line 184 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_SPDIFRX_REGISTER_CALLBACKS

#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS   0U /* SPDIFRX register callback disabled */

Definition at line 185 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_SMBUS_REGISTER_CALLBACKS

#define USE_HAL_SMBUS_REGISTER_CALLBACKS   0U /* SMBUS register callback disabled */

Definition at line 186 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_SPI_REGISTER_CALLBACKS

#define USE_HAL_SPI_REGISTER_CALLBACKS   0U /* SPI register callback disabled */

Definition at line 187 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_TIM_REGISTER_CALLBACKS

#define USE_HAL_TIM_REGISTER_CALLBACKS   0U /* TIM register callback disabled */

Definition at line 188 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_UART_REGISTER_CALLBACKS

#define USE_HAL_UART_REGISTER_CALLBACKS   0U /* UART register callback disabled */

Definition at line 189 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_USART_REGISTER_CALLBACKS

#define USE_HAL_USART_REGISTER_CALLBACKS   0U /* USART register callback disabled */

Definition at line 190 of file stm32f4xx_hal_conf_template.h.

◆ USE_HAL_WWDG_REGISTER_CALLBACKS

#define USE_HAL_WWDG_REGISTER_CALLBACKS   0U /* WWDG register callback disabled */

Definition at line 191 of file stm32f4xx_hal_conf_template.h.

◆ MAC_ADDR0

#define MAC_ADDR0   2U

Uncomment the line below to expanse the "assert_param" macro in the HAL drivers code.

Definition at line 205 of file stm32f4xx_hal_conf_template.h.

◆ MAC_ADDR1

#define MAC_ADDR1   0U

Definition at line 206 of file stm32f4xx_hal_conf_template.h.

◆ MAC_ADDR2

#define MAC_ADDR2   0U

Definition at line 207 of file stm32f4xx_hal_conf_template.h.

◆ MAC_ADDR3

#define MAC_ADDR3   0U

Definition at line 208 of file stm32f4xx_hal_conf_template.h.

◆ MAC_ADDR4

#define MAC_ADDR4   0U

Definition at line 209 of file stm32f4xx_hal_conf_template.h.

◆ MAC_ADDR5

#define MAC_ADDR5   0U

Definition at line 210 of file stm32f4xx_hal_conf_template.h.

◆ ETH_RX_BUF_SIZE

#define ETH_RX_BUF_SIZE   1528U /* ETH Max buffer size for receive */

Definition at line 213 of file stm32f4xx_hal_conf_template.h.

◆ ETH_TX_BUF_SIZE

#define ETH_TX_BUF_SIZE   1528U /* ETH Max buffer size for transmit */

Definition at line 214 of file stm32f4xx_hal_conf_template.h.

◆ ETH_RXBUFNB

#define ETH_RXBUFNB   4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */

Definition at line 215 of file stm32f4xx_hal_conf_template.h.

◆ ETH_TXBUFNB

#define ETH_TXBUFNB   4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */

Definition at line 216 of file stm32f4xx_hal_conf_template.h.

◆ DP83848_PHY_ADDRESS

#define DP83848_PHY_ADDRESS   0x01U

Definition at line 221 of file stm32f4xx_hal_conf_template.h.

◆ PHY_RESET_DELAY

#define PHY_RESET_DELAY   0x000000FFU

Definition at line 223 of file stm32f4xx_hal_conf_template.h.

◆ PHY_CONFIG_DELAY

#define PHY_CONFIG_DELAY   0x00000FFFU

Definition at line 225 of file stm32f4xx_hal_conf_template.h.

◆ PHY_READ_TO

#define PHY_READ_TO   0x0000FFFFU

Definition at line 227 of file stm32f4xx_hal_conf_template.h.

Referenced by HAL_ETH_ReadPHYRegister().

◆ PHY_WRITE_TO

#define PHY_WRITE_TO   0x0000FFFFU

Definition at line 228 of file stm32f4xx_hal_conf_template.h.

Referenced by HAL_ETH_WritePHYRegister().

◆ PHY_BCR

#define PHY_BCR   ((uint16_t)0x0000)

Transceiver Basic Control Register

Definition at line 232 of file stm32f4xx_hal_conf_template.h.

◆ PHY_BSR

#define PHY_BSR   ((uint16_t)0x0001)

Transceiver Basic Status Register

Definition at line 233 of file stm32f4xx_hal_conf_template.h.

◆ PHY_RESET

#define PHY_RESET   ((uint16_t)0x8000)

PHY Reset

Definition at line 235 of file stm32f4xx_hal_conf_template.h.

◆ PHY_LOOPBACK

#define PHY_LOOPBACK   ((uint16_t)0x4000)

Select loop-back mode

Definition at line 236 of file stm32f4xx_hal_conf_template.h.

◆ PHY_FULLDUPLEX_100M

#define PHY_FULLDUPLEX_100M   ((uint16_t)0x2100)

Set the full-duplex mode at 100 Mb/s

Definition at line 237 of file stm32f4xx_hal_conf_template.h.

◆ PHY_HALFDUPLEX_100M

#define PHY_HALFDUPLEX_100M   ((uint16_t)0x2000)

Set the half-duplex mode at 100 Mb/s

Definition at line 238 of file stm32f4xx_hal_conf_template.h.

◆ PHY_FULLDUPLEX_10M

#define PHY_FULLDUPLEX_10M   ((uint16_t)0x0100)

Set the full-duplex mode at 10 Mb/s

Definition at line 239 of file stm32f4xx_hal_conf_template.h.

◆ PHY_HALFDUPLEX_10M

#define PHY_HALFDUPLEX_10M   ((uint16_t)0x0000)

Set the half-duplex mode at 10 Mb/s

Definition at line 240 of file stm32f4xx_hal_conf_template.h.

◆ PHY_AUTONEGOTIATION

#define PHY_AUTONEGOTIATION   ((uint16_t)0x1000)

Enable auto-negotiation function

Definition at line 241 of file stm32f4xx_hal_conf_template.h.

◆ PHY_RESTART_AUTONEGOTIATION

#define PHY_RESTART_AUTONEGOTIATION   ((uint16_t)0x0200)

Restart auto-negotiation function

Definition at line 242 of file stm32f4xx_hal_conf_template.h.

◆ PHY_POWERDOWN

#define PHY_POWERDOWN   ((uint16_t)0x0800)

Select the power down mode

Definition at line 243 of file stm32f4xx_hal_conf_template.h.

◆ PHY_ISOLATE

#define PHY_ISOLATE   ((uint16_t)0x0400)

Isolate PHY from MII

Definition at line 244 of file stm32f4xx_hal_conf_template.h.

◆ PHY_AUTONEGO_COMPLETE

#define PHY_AUTONEGO_COMPLETE   ((uint16_t)0x0020)

Auto-Negotiation process completed

Definition at line 246 of file stm32f4xx_hal_conf_template.h.

◆ PHY_LINKED_STATUS

#define PHY_LINKED_STATUS   ((uint16_t)0x0004)

Valid link established

Definition at line 247 of file stm32f4xx_hal_conf_template.h.

◆ PHY_JABBER_DETECTION

#define PHY_JABBER_DETECTION   ((uint16_t)0x0002)

Jabber condition detected

Definition at line 248 of file stm32f4xx_hal_conf_template.h.

◆ PHY_SR

#define PHY_SR   ((uint16_t)0x0010)

PHY status register Offset

Definition at line 252 of file stm32f4xx_hal_conf_template.h.

◆ PHY_MICR

#define PHY_MICR   ((uint16_t)0x0011)

MII Interrupt Control Register

Definition at line 253 of file stm32f4xx_hal_conf_template.h.

◆ PHY_MISR

#define PHY_MISR   ((uint16_t)0x0012)

MII Interrupt Status and Misc. Control Register

Definition at line 254 of file stm32f4xx_hal_conf_template.h.

◆ PHY_LINK_STATUS

#define PHY_LINK_STATUS   ((uint16_t)0x0001)

PHY Link mask

Definition at line 256 of file stm32f4xx_hal_conf_template.h.

◆ PHY_SPEED_STATUS

#define PHY_SPEED_STATUS   ((uint16_t)0x0002)

PHY Speed mask

Definition at line 257 of file stm32f4xx_hal_conf_template.h.

◆ PHY_DUPLEX_STATUS

#define PHY_DUPLEX_STATUS   ((uint16_t)0x0004)

PHY Duplex mask

Definition at line 258 of file stm32f4xx_hal_conf_template.h.

◆ PHY_MICR_INT_EN

#define PHY_MICR_INT_EN   ((uint16_t)0x0002)

PHY Enable interrupts

Definition at line 260 of file stm32f4xx_hal_conf_template.h.

◆ PHY_MICR_INT_OE

#define PHY_MICR_INT_OE   ((uint16_t)0x0001)

PHY Enable output interrupt events

Definition at line 261 of file stm32f4xx_hal_conf_template.h.

◆ PHY_MISR_LINK_INT_EN

#define PHY_MISR_LINK_INT_EN   ((uint16_t)0x0020)

Enable Interrupt on change of link status

Definition at line 263 of file stm32f4xx_hal_conf_template.h.

◆ PHY_LINK_INTERRUPT

#define PHY_LINK_INTERRUPT   ((uint16_t)0x2000)

PHY link status interrupt mask

Definition at line 264 of file stm32f4xx_hal_conf_template.h.

◆ USE_SPI_CRC

#define USE_SPI_CRC   1U

Definition at line 273 of file stm32f4xx_hal_conf_template.h.

◆ assert_param

#define assert_param ( expr)
Value:
((void)0U)

Include module's header file.

Definition at line 494 of file stm32f4xx_hal_conf_template.h.